From: Bin Meng bmeng.cn@gmail.com
Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it.
This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/
Signed-off-by: Bin Meng bmeng.cn@gmail.com Signed-off-by: Vladimir Oltean olteanv@gmail.com Acked-by: Joe Hershberger joe.hershberger@ni.com
[Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs - Completely removed non-DM_ETH support from ls1021atwr - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio" and from "fsl,tsec" to "fsl,etsec2" to match Linux --- Changes from v2:
None.
Changes from v1:
Applied non-reverse #ifdef logic where possible. Removed the non-DM_ETH code from board/freescale/ls1021atwr/ and include/configs/ls1021atwr.h. Aligned compatible strings to Linux.
arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +- arch/arm/cpu/armv7/ls102xa/fdt.c | 10 +++++ arch/arm/dts/ls1021a-twr.dtsi | 32 ++++++++++++++++ arch/arm/dts/ls1021a.dtsi | 30 +++++++++++++-- board/freescale/ls1021atwr/ls1021atwr.c | 38 ------------------- configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 + configs/ls1021atwr_nor_defconfig | 2 + configs/ls1021atwr_nor_lpuart_defconfig | 2 + configs/ls1021atwr_qspi_defconfig | 2 + ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 + configs/ls1021atwr_sdcard_ifc_defconfig | 2 + configs/ls1021atwr_sdcard_qspi_defconfig | 2 + include/configs/ls1021atwr.h | 28 +------------- 13 files changed, 85 insertions(+), 69 deletions(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index ecf9e869855e..9ccfe1042ce5 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -296,7 +296,7 @@ int cpu_mmc_init(bd_t *bis)
int cpu_eth_init(bd_t *bis) { -#ifdef CONFIG_TSEC_ENET +#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH) tsec_standard_init(bis); #endif
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 8bf9c42b2260..1aadffff5991 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -16,12 +16,17 @@ #include <tsec.h> #include <asm/arch/immap_ls102xa.h> #include <fsl_sec.h> +#include <dm.h>
DECLARE_GLOBAL_DATA_PTR;
void ft_fixup_enet_phy_connect_type(void *fdt) { +#ifdef CONFIG_DM_ETH + struct udevice *dev; +#else struct eth_device *dev; +#endif struct tsec_private *priv; const char *enet_path, *phy_path; char enet[16]; @@ -29,7 +34,12 @@ void ft_fixup_enet_phy_connect_type(void *fdt) int phy_node; int i = 0; uint32_t ph; +#ifdef CONFIG_DM_ETH + char *name[3] = { "ethernet@2d10000", "ethernet@2d50000", + "ethernet@2d90000" }; +#else char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" }; +#endif
for (; i < ARRAY_SIZE(name); i++) { dev = eth_get_dev_by_name(name[i]); diff --git a/arch/arm/dts/ls1021a-twr.dtsi b/arch/arm/dts/ls1021a-twr.dtsi index 5d3275ced913..27c96f95400a 100644 --- a/arch/arm/dts/ls1021a-twr.dtsi +++ b/arch/arm/dts/ls1021a-twr.dtsi @@ -51,6 +51,26 @@ }; };
+&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + &i2c0 { status = "okay"; }; @@ -84,12 +104,24 @@ sgmii_phy0: ethernet-phy@0 { reg = <0x0>; }; + rgmii_phy1: ethernet-phy@1 { reg = <0x1>; }; + sgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ tbi1: tbi-phy@1f { reg = <0x1f>; device_type = "tbi-phy"; diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi index 7fb24ab68787..e419d9c44fcb 100644 --- a/arch/arm/dts/ls1021a.dtsi +++ b/arch/arm/dts/ls1021a.dtsi @@ -350,12 +350,36 @@ <&platform_clk 1>; };
+ enet0: ethernet@2d10000 { + compatible = "fsl,etsec2"; + reg = <0x2d10000 0x1000>; + status = "disabled"; + }; + + enet1: ethernet@2d50000 { + compatible = "fsl,etsec2"; + reg = <0x2d50000 0x1000>; + status = "disabled"; + }; + + enet2: ethernet@2d90000 { + compatible = "fsl,etsec2"; + reg = <0x2d90000 0x1000>; + status = "disabled"; + }; + mdio0: mdio@2d24000 { - compatible = "gianfar"; - device_type = "mdio"; + compatible = "fsl,etsec2-mdio"; + reg = <0x2d24000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio1: mdio@2d64000 { + compatible = "fsl,etsec2-mdio"; + reg = <0x2d64000 0x4000>; #address-cells = <1>; #size-cells = <0>; - reg = <0x2d24000 0x4000>; };
usb@8600000 { diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 01ba1bc96213..fcf2ec97889d 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -248,44 +248,6 @@ int board_mmc_init(bd_t *bis)
int board_eth_init(bd_t *bis) { -#ifdef CONFIG_TSEC_ENET - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - if (is_serdes_configured(SGMII_TSEC1)) { - puts("eTSEC1 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - if (is_serdes_configured(SGMII_TSEC2)) { - puts("eTSEC2 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; - num++; -#endif - if (!num) { - printf("No TSECs initialized\n"); - return 0; - } - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); -#endif - return pci_eth_init(bis); }
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index 6c4bb9aaf665..830affc925b5 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -40,7 +40,9 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index 9d8c2024c04e..c4d18c6f6907 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -40,7 +40,9 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index b9cfdb6fd69e..b74d58a3487c 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -42,7 +42,9 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 8c27c5908cb5..911061a37881 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -42,7 +42,9 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 979878d560f4..d8c26393cead 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -53,7 +53,9 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index 59af172cb8a1..d23c87504c9b 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -54,7 +54,9 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index d7fec5e365eb..7b2c2900a060 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -53,7 +53,9 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y +CONFIG_PHY_ATHEROS=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index de0c9c7f26af..cbf7a496a564 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -260,33 +260,7 @@ */
#ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 1 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_ATHEROS - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 +#define CONFIG_ETHPRIME "ethernet@2d10000" #endif
/* PCIe */