A now removed comment promises to "limit SYSRAM usage to first 128 KB". This would imply that only SYSRAM from 0x2ffc0000 - 0x2ffe0000 would be used. This is not what happens at all.
First, SPL_MAX_SIZE is referenced from SPL_TEXT_BASE, which on all existing configs is set to 0x2ffc2500, not SYSRAM_BASE (0x2ffc0000). Some of it is in the first 128 KiB and some of it is in the second 128 KiB chunk of SYSRAM.
Second, SPL_MAX_SIZE, does not restrict the BSS size. While a valiant attempt is made via SPL_BSS_MAX_SIZE, the value of 0x00100000 is much larger than SYSRAM, and doesn't account for the non-BSS sections.
Because we're putting the .text and .bss in the same boat, the correct way to limit them together is via SPL_MAX_FOOTPRINT. With the current SPL_TEXT_BASE, we couldn't limit even a very basic SPL to the first 128 KiB, and there is no technical reason to do so. Because of this, simply allow the SPL to use all SYSRAM.
Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com --- include/configs/stm32mp1.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index 56a70cb584..440efa1a55 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -50,12 +50,12 @@ /* SPL support */ #ifdef CONFIG_SPL /* SPL use DDR */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0xC0300000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x01D00000
-/* limit SYSRAM usage to first 128 KB */ -#define CONFIG_SPL_MAX_SIZE 0x00020000 +/* Restrict SPL to fit within SYSRAM */ +#define STM32_SYSRAM_END (STM32_SYSRAM_BASE + STM32_SYSRAM_SIZE) +#define CONFIG_SPL_MAX_FOOTPRINT (STM32_SYSRAM_END - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \ STM32_SYSRAM_SIZE) #endif /* #ifdef CONFIG_SPL */