From: Claudiu Beznea claudiu.beznea@microchip.com
Clock setup was intended for setting clocks at boot time on SAMA7G5, e.g. for root clocks like PLLs, that were used to feed IPs needed alive in u-boot (e.g. Ethernet clock feed by a PLL). Export this functionality to all at91 clocks as it may be necessary on other SoCs.
Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Signed-off-by: Sergiu Moga sergiu.moga@microchip.com ---
v1 -> v2: - Additional patch, this was not here in v1
v2 -> v3: - Nothing
drivers/clk/at91/pmc.c | 42 +++++++++++++++++++++++++++++++++ drivers/clk/at91/pmc.h | 16 +++++++++++++ drivers/clk/at91/sama7g5.c | 48 +++++--------------------------------- 3 files changed, 64 insertions(+), 42 deletions(-)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index 270892517a..87d2069d89 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c @@ -120,3 +120,45 @@ int at91_clk_mux_index_to_val(const u32 *table, u32 num_parents, u32 index)
return table[index]; } + +int at91_clk_setup(const struct pmc_clk_setup *setup, int size) +{ + struct clk *c, *parent; + int i, ret; + + if (!size) + return 0; + + if (!setup) + return -EINVAL; + + for (i = 0; i < size; i++) { + ret = clk_get_by_id(setup[i].cid, &c); + if (ret) + return ret; + + if (setup[i].pid) { + ret = clk_get_by_id(setup[i].pid, &parent); + if (ret) + return ret; + + ret = clk_set_parent(c, parent); + if (ret) + return ret; + + if (setup[i].prate) { + ret = clk_set_rate(parent, setup[i].prate); + if (ret < 0) + return ret; + } + } + + if (setup[i].rate) { + ret = clk_set_rate(c, setup[i].rate); + if (ret < 0) + return ret; + } + } + + return 0; +} diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h index 17793b8802..ff464522aa 100644 --- a/drivers/clk/at91/pmc.h +++ b/drivers/clk/at91/pmc.h @@ -77,6 +77,20 @@ struct clk_usbck_layout { u32 usbdiv_mask; };
+/** + * Clock setup description + * @cid: clock id corresponding to clock subsystem + * @pid: parent clock id corresponding to clock subsystem + * @rate: clock rate + * @prate: parent rate + */ +struct pmc_clk_setup { + unsigned int cid; + unsigned int pid; + unsigned long rate; + unsigned long prate; +}; + extern const struct clk_programmable_layout at91rm9200_programmable_layout; extern const struct clk_programmable_layout at91sam9g45_programmable_layout; extern const struct clk_programmable_layout at91sam9x5_programmable_layout; @@ -160,4 +174,6 @@ void pmc_write(void __iomem *base, unsigned int off, unsigned int val); void pmc_update_bits(void __iomem *base, unsigned int off, unsigned int mask, unsigned int bits);
+int at91_clk_setup(const struct pmc_clk_setup *setup, int size); + #endif diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c index d1ec3c82b5..8bd9c14156 100644 --- a/drivers/clk/at91/sama7g5.c +++ b/drivers/clk/at91/sama7g5.c @@ -1070,19 +1070,8 @@ static const struct { }, };
-/** - * Clock setup description - * @cid: clock id corresponding to clock subsystem - * @pid: parent clock id corresponding to clock subsystem - * @rate: clock rate - * @prate: parent rate - */ -static const struct pmc_clk_setup { - unsigned int cid; - unsigned int pid; - unsigned long rate; - unsigned long prate; -} sama7g5_clk_setup[] = { +/* Clock setup description */ +static const struct pmc_clk_setup sama7g5_clk_setup[] = { { .cid = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_ETH_FRAC), .rate = 625000000, @@ -1119,7 +1108,7 @@ static int sama7g5_clk_probe(struct udevice *dev) unsigned int *muxallocs[SAMA7G5_MAX_MUX_ALLOCS]; const char *p[10]; unsigned int cm[10], m[10], *tmpclkmux, *tmpmux; - struct clk clk, *c, *parent; + struct clk clk, *c; bool main_osc_bypass; int ret, muxallocindex = 0, clkmuxallocindex = 0, i, j;
@@ -1353,34 +1342,9 @@ static int sama7g5_clk_probe(struct udevice *dev) }
/* Setup clocks. */ - for (i = 0; i < ARRAY_SIZE(sama7g5_clk_setup); i++) { - ret = clk_get_by_id(sama7g5_clk_setup[i].cid, &c); - if (ret) - goto fail; - - if (sama7g5_clk_setup[i].pid) { - ret = clk_get_by_id(sama7g5_clk_setup[i].pid, &parent); - if (ret) - goto fail; - - ret = clk_set_parent(c, parent); - if (ret) - goto fail; - - if (sama7g5_clk_setup[i].prate) { - ret = clk_set_rate(parent, - sama7g5_clk_setup[i].prate); - if (ret < 0) - goto fail; - } - } - - if (sama7g5_clk_setup[i].rate) { - ret = clk_set_rate(c, sama7g5_clk_setup[i].rate); - if (ret < 0) - goto fail; - } - } + ret = at91_clk_setup(sama7g5_clk_setup, ARRAY_SIZE(sama7g5_clk_setup)); + if (ret) + goto fail;
return 0;