31 Mar
2005
31 Mar
'05
8:32 p.m.
In message <892C3EC180087B4498C69413FCCBB73201316469@sof_msg> you wrote:
I try to use a ADS860 with a MPC850. I compile u-boot, dowload in flash and reset. When reset, I see at prompt this :
How did you configure U-Boot? Only the "FADS850SAR" configuration supports a MPC850 processor, but you write "ADS860" which does not fit.
Board: ADS rev PILOT
May I recommend to use this as a door stop and get some working hardware instead?
And I try to ping to my host :
=>ping 172.17.21.30 Using SCC ETHERNET device TX timeout TX not ready TX timeout ping failed; host 172.17.21.30 is not alive =>
This is most probably a misconfiguration of U-Boot; the MPC850 and MPC860 use different port pins. I guess you mixed those up.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
He'd heard her use that sweet, innocent tone of voice before. It
meant that, pretty soon, there was going to be trouble.
- Terry Pratchett, _Truckers_