On Sat, Apr 30, 2022 at 7:01 AM Peng Fan (OSS) peng.fan@oss.nxp.com wrote:
From: Peng Fan peng.fan@nxp.com
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_init to make sure driver model work.
Thanks for doing this!
Tested-by: Adam Ford aford173@gmail.com #imx8mm_beacon
Signed-off-by: Peng Fan peng.fan@nxp.com
board/beacon/imx8mm/spl.c | 12 ++---------- board/beacon/imx8mn/spl.c | 11 ++--------- configs/imx8mm_beacon_defconfig | 1 - configs/imx8mn_beacon_2g_defconfig | 1 - configs/imx8mn_beacon_defconfig | 1 - include/configs/imx8mm_beacon.h | 2 -- include/configs/imx8mn_beacon.h | 2 -- 7 files changed, 4 insertions(+), 26 deletions(-)
diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c index 12266b22a42..f92b4c3ed0a 100644 --- a/board/beacon/imx8mm/spl.c +++ b/board/beacon/imx8mm/spl.c @@ -59,14 +59,8 @@ int board_fit_config_name_match(const char *name) } #endif
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-static iomux_v3_cfg_t const uart_pads[] = {
IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL),IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL),-};
static iomux_v3_cfg_t const wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -79,8 +73,6 @@ int board_early_init_f(void)
set_wdog_reset(wdog);
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));return 0;}
@@ -128,8 +120,6 @@ void board_init_f(ulong dummy)
timer_init();
preloader_console_init();/* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);@@ -139,6 +129,8 @@ void board_init_f(ulong dummy) hang(); }
preloader_console_init();ret = uclass_get_device_by_name(UCLASS_CLK, "clock-controller@30380000", &dev);diff --git a/board/beacon/imx8mn/spl.c b/board/beacon/imx8mn/spl.c index bb51be01c52..4563446db19 100644 --- a/board/beacon/imx8mn/spl.c +++ b/board/beacon/imx8mn/spl.c @@ -68,7 +68,6 @@ int board_fit_config_name_match(const char *name) } #endif
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define PWM1_PAD_CTRL (PAD_CTL_FSEL2 | PAD_CTL_DSE6)
@@ -76,11 +75,6 @@ static iomux_v3_cfg_t const pwm_pads[] = { IMX8MN_PAD_GPIO1_IO01__PWM1_OUT | MUX_PAD_CTRL(PWM1_PAD_CTRL), };
-static iomux_v3_cfg_t const uart_pads[] = {
IMX8MN_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),IMX8MN_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),-};
static iomux_v3_cfg_t const wdog_pads[] = { IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -95,7 +89,6 @@ int board_early_init_f(void) imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); set_wdog_reset(wdog);
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); init_uart_clk(1); return 0;@@ -114,14 +107,14 @@ void board_init_f(ulong dummy)
timer_init();
preloader_console_init();ret = spl_init(); if (ret) { debug("spl_init() failed: %d\n", ret); hang(); }
preloader_console_init();enable_tzc380(); /* DDR initialization */diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig index 9cd8ac97285..a8981975f66 100644 --- a/configs/imx8mm_beacon_defconfig +++ b/configs/imx8mm_beacon_defconfig @@ -112,7 +112,6 @@ CONFIG_SPL_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_CONS_INDEX=2 CONFIG_DM_SERIAL=y -# CONFIG_SPL_DM_SERIAL is not set CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index 145f96d491d..cf1720725d0 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -114,7 +114,6 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RESET=y CONFIG_DM_SERIAL=y -# CONFIG_SPL_DM_SERIAL is not set CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index 9052e68e967..882a6044989 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -118,7 +118,6 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RESET=y CONFIG_DM_SERIAL=y -# CONFIG_SPL_DM_SERIAL is not set CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 7c17f14964f..4c9b5491f78 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -91,8 +91,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 2048 #define CONFIG_SYS_MAXARGS 64 diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 41ce3c1c8ce..c16dda5e22c 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -107,8 +107,6 @@ #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ #endif
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 2048
#define CONFIG_SYS_MAXARGS 64
2.36.0