From: Ye Li ye.li@nxp.com
iMX8MQ EVK board has a eMMC5.0 chip and supports SD3.0, so enable the UHS and HS400 configs to enhance the eMMC/SD access.
The change also needs to set usdhc clock to 400Mhz, and add the off-on-delay-us to SD reset pin, otherwise some SD cards will fail to select UHS mode in re-initialization.
Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/mach-imx/imx8m/clock_imx8mq.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/arch/arm/mach-imx/imx8m/clock_imx8mq.c index aad9cf13ef..76104e4f92 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mq.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mq.c @@ -428,15 +428,13 @@ void init_clk_usdhc(u32 index) case 0: clock_enable(CCGR_USDHC1, 0); clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON | - CLK_ROOT_SOURCE_SEL(1) | - CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2)); + CLK_ROOT_SOURCE_SEL(1)); clock_enable(CCGR_USDHC1, 1); return; case 1: clock_enable(CCGR_USDHC2, 0); clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON | - CLK_ROOT_SOURCE_SEL(1) | - CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2)); + CLK_ROOT_SOURCE_SEL(1)); clock_enable(CCGR_USDHC2, 1); return; default: