Greetings
The subject says it all really!!
I've applied the u-boot-1.1.6-hs1.patch from avrforums to git head (no errors, just a couple of offset & fuzzy matches) so I'm hoping to be able to build a u-boot image with networking for the new avr32 demo board.
The board is on order but I don't know what to expect by way of pre-loaded firmware - especially what capabilities it will have.
You will get a board with U-Boot / Linux / Root filesystem but all the S/W is inside the AVR32 BSP 2.0 which is downloadable from www.atmel.com (or soon will be) There is no CD included in the kit.
I think that the BSP should contain the needed config file.
Any pointers gratefully received:-)
-- Robin
Best Regards Ulf Samuelsson ulf@atmel.com Atmel Nordic AB Mail: Box 2033, 174 02 Sundbyberg, Sweden Visit: Kavallerivägen 24, 174 58 Sundbyberg, Sweden Phone +46 (8) 441 54 22 Fax +46 (8) 441 54 29 GSM +46 (706) 22 44 57
Technical support when I am not available: AT90 AVR Applications Group: mailto:avr@atmel.com AT91 ARM Applications Group: mailto:at91support@atmel.com AVR32 Applications Group mailto:avr32@atmel.com http://www.avrfreaks.net/; http://avr32linux.org/ http://www.at91.com/ ; ftp://at91dist:distrib@81.80.104.162/