I forget to put some infos !
Hi all,
I'm trying to port uboot and linux on a Avnet fx12 mm. Thanks to Llandre for his mmfx12 patch. And i also used the ll_temac driver. So uboot is running with network.
I built linux using the xilinx kernel (git://git.xilinx.com/linux-2.6-xlnx.git). I can start it using XMD but not with uboot.
So my question, Did someone already the same job ? I'm a newbie, so every tip is welcome
The main aim of the system is to achieve a fast Ethernet connection > 15 MB/s
Architecture on the virtex 4 FX and mapping
ppc405 DDR_SDRAM 0x00000000 0x03ffffff FLASH_2Mx16 0xffc00000 0xffffffff xps_intc_0 interrupt controller TriMode_MAC_GMII RS232 using xps_uart16550 PLB Bus
I have built u-boot 1.3.3.rc3 Linux kernel is 2.6.25-xlnx
Thanks
Simon Frey
_____________________________________________________________________________ Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr