From: Rob Herring rob.herring@calxeda.com
This enables the XGMAC ethernet driver and networking related config options.
Signed-off-by: Jason Hobbs jason.hobbs@calxeda.com Signed-off-by: Rob Herring rob.herring@calxeda.com --- board/highbank/highbank.c | 14 ++++++++++++++ include/configs/highbank.h | 19 +++++++++++++++++-- 2 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index 8db8a2b..1802c67 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -33,8 +33,22 @@ int board_init(void) return 0; }
+/* We know all the init functions have been run now */ +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_CALXEDA_XGMAC + rc = calxedaxgmac_initialize(0, 0xfff50000); + rc |= calxedaxgmac_initialize(1, 0xfff51000); +#endif + return rc; +} + int misc_init_r(void) { + setenv("verify", "n"); + ahci_init(0xffe08000); scsi_scan(1); return 0; diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 9c85788..01c128b 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -51,19 +51,28 @@
#define CONFIG_DOS_PARTITION
+#define CONFIG_NET_MULTI +#define CONFIG_CALXEDA_XGMAC + +/* PXE support */ +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" + /* * Command line configuration. */ #include <config_cmd_default.h> -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS
#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_MEMORY #define CONFIG_CMD_LOADS #define CONFIG_CMD_SCSI #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_PXE +#define CONFIG_MENU
#define CONFIG_BOOTDELAY 2 /* @@ -82,6 +91,12 @@
#define CONFIG_SYS_LOAD_ADDR 0x800000
+#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdtaddr_r=0x600000\0" \ + "pxefile_addr_r=0x700000\0" \ + "kernel_addr_r=0x800000\0" \ + "ramdisk_addr_r=0x01000000\0" \ + /*----------------------------------------------------------------------- * Stack sizes *