For BRCMNAND with 1-bit BCH ECC (BCH-1) such as used on the D-Link DIR-885L and DIR-890L routers, we need to explicitly select the ECC like this in the device tree:
nand-ecc-algo = "bch"; nand-ecc-strength = <1>; nand-ecc-step-size = <512>;
This is handled by the Linux kernel but U-Boot core does not respect this. Fix it up by parsing the algorithm and preserve the behaviour using this property to select software BCH as far as possible.
Signed-off-by: Linus Walleij linus.walleij@linaro.org --- ChangeLog v1->v2: - Drop pointless check for ecc_algo >= 0, it is always
= 0.
--- drivers/mtd/nand/raw/nand_base.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 9eba360d55f3..c173fd09237a 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -4487,6 +4487,7 @@ EXPORT_SYMBOL(nand_detect); static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, ofnode node) { int ret, ecc_mode = -1, ecc_strength, ecc_step; + int ecc_algo = NAND_ECC_UNKNOWN; const char *str;
ret = ofnode_read_s32_default(node, "nand-bus-width", -1); @@ -4512,10 +4513,13 @@ static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, ofnode nod ecc_mode = NAND_ECC_SOFT_BCH; }
- if (ecc_mode == NAND_ECC_SOFT) { - str = ofnode_read_string(node, "nand-ecc-algo"); - if (str && !strcmp(str, "bch")) + str = ofnode_read_string(node, "nand-ecc-algo"); + if (str && !strcmp(str, "bch")) { + ecc_algo = NAND_ECC_BCH; + if (ecc_mode == NAND_ECC_SOFT) ecc_mode = NAND_ECC_SOFT_BCH; + } else if (!strcmp(str, "hamming")) { + ecc_algo = NAND_ECC_HAMMING; }
ecc_strength = ofnode_read_s32_default(node, @@ -4529,6 +4533,8 @@ static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, ofnode nod return -EINVAL; }
+ chip->ecc.algo = ecc_algo; + if (ecc_mode >= 0) chip->ecc.mode = ecc_mode;