Re: [PATCH 0/4] Adding support to load secure firmware for HS devices

On Tue, 21 May 2024 16:26:44 +0530, Udit Kumar wrote:

Some use case needs rproc firmware to be loaded at u-boot stage, using following commands at u-boot shell, firmware could be loaded

=> setenv dorprocboot 1 => run boot_rprocs

For Secure devices, secure version of rproc firmware should be loaded, which is appended by sec keyword[0]. but currently non-secure firmware is loaded even for secure devices. So adding support for loading secure firmware on Secured devices.

[...]

Applied to u-boot/next, thanks!