Hello,
On 07/03/2015 02:16 AM, Simon Glass wrote:
Enable PMICs, regulators and the like so that new drivers will be made available.
Signed-off-by: Simon Glass sjg@chromium.org
board/samsung/smdk5420/smdk5420.c | 2 +- configs/arndale_defconfig | 2 ++ configs/odroid-xu3_defconfig | 5 +++++ configs/peach-pi_defconfig | 17 +++++++++++++++++ configs/peach-pit_defconfig | 17 +++++++++++++++++ configs/smdk5250_defconfig | 10 ++++++++++ configs/smdk5420_defconfig | 5 +++++ configs/snow_defconfig | 23 +++++++++++++++++++++++ include/configs/arndale.h | 4 ++++ include/configs/exynos5-common.h | 10 ++-------- include/configs/exynos5-dt-common.h | 5 ----- include/configs/smdk5250.h | 3 --- include/configs/snow.h | 3 --- 13 files changed, 86 insertions(+), 20 deletions(-)
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c index 88f4044..57cc92c 100644 --- a/board/samsung/smdk5420/smdk5420.c +++ b/board/samsung/smdk5420/smdk5420.c @@ -50,9 +50,9 @@ static int has_edp_bridge(void)
void exynos_lcd_power_on(void) { +#ifdef CONFIG_POWER_TPS65090 int ret;
-#ifdef CONFIG_POWER_TPS65090 ret = tps65090_init(); if (ret < 0) { printf("%s: tps65090_init() failed\n", __func__); diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 43f39f2..10e9d03 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -10,3 +10,5 @@ CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_DM_I2C=y +CONFIG_DM_I2C_COMPAT=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index c9c4849..9760808 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -4,3 +4,8 @@ CONFIG_TARGET_ODROID_XU3=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" CONFIG_CMD_NET=y +CONFIG_DM_I2C=y +CONFIG_DM_I2C_COMPAT=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y
At present we don't have pmic/regulator driver for XU3, but probably will have soon, so it can be enabled.
But there is no video bridge on XU3.
I assume that you enable this, because of using the single board file, but should go this way?
Regards