Re: [U-Boot] LCD Support on mx51 vision2

Hi Anatolij,

On 5/8/12, Anatolij Gustschin agust@denx.de wrote:

the issue is probably the insufficient malloc area size defined in the board config file. The mx51evk defines CONFIG_SYS_MALLOC_LEN to be slightly more than 2 MiB. The vision2 config sets CONFIG_SYS_MALLOC_LEN to 10 MiB. Please try increasing CONFIG_SYS_MALLOC_LEN.

Thanks for your suggestion. Increasing CONFIG_SYS_MALLOC_LEN does not fix the issue.

I will debug this problem.

Thanks,

Fabio Estevam