Re: [U-Boot] [PATCH v2 1/3] arm: dts: stm32mp157: Add missing pinctrl definitions

On 5/2/19 9:56 AM, Manivannan Sadhasivam wrote:

Add missing pinctrl definitions for STM32MP157.

Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org

arch/arm/dts/stm32mp157-pinctrl.dtsi | 63 ++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+)

diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 0aae69b0a04..200d2c00c5f 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -220,6 +220,16 @@ }; };

• 	i2c1_pins_b: i2c1-1 {
  

• 		pins {
  

• 			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
  

• 				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
  

• 			bias-disable;
  

• 			drive-open-drain;
  

• 			slew-rate = <0>;
  

• 		};
  

• 	};
  

• i2c2_pins_a: i2c2-0 {
  	pins {
  		pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
  

@@ -230,6 +240,16 @@ }; };

• 	i2c2_pins_b: i2c2-1 {
  

• 		pins {
  

• 			pinmux = <STM32_PINMUX('Z', 0, AF3)>, /* I2C2_SCL */
  

• 				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
  

• 			bias-disable;
  

• 			drive-open-drain;
  

• 			slew-rate = <0>;
  

• 		};
  

• 	};
  

• i2c5_pins_a: i2c5-0 {
  	pins {
  		pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
  

@@ -375,6 +395,21 @@ }; };

• 	spi2_pins_a: spi2-0 {
  

• 		pins1 {
  

• 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
  

• 				 <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */
  

• 				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
  

• 			bias-disable;
  

• 			drive-push-pull;
  

• 			slew-rate = <3>;
  

• 		};
  

• 		pins2 {
  

• 			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
  

• 			bias-disable;
  

• 		};
  

• 	};
  

• stusb1600_pins_a: stusb1600-0 {
  	pins {
  		pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
  

@@ -395,6 +430,34 @@ }; };

• 	uart4_pins_b: uart4-1 {
  

• 		pins1 {
  

• 			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
  

• 			bias-disable;
  

• 			drive-push-pull;
  

• 			slew-rate = <0>;
  

• 		};
  

• 		pins2 {
  

• 			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
  

• 			bias-disable;
  

• 		};
  

• 	};
  

• 	uart7_pins_a: uart7-0 {
  

• 		pins1 {
  

• 			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
  

• 			bias-disable;
  

• 			drive-push-pull;
  

• 			slew-rate = <0>;
  

• 		};
  

• 		pins2 {
  

• 			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
  

• 				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
  

• 				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
  

• 			bias-disable;
  

• 		};
  

• 	};
  

• usbotg_hs_pins_a: usbotg_hs-0 {
  	pins {
  		pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
  
  

Applied

Thanks