This patch add FEC support for Freescale MX53 processor
Signed-off-by: Jason Liu r64343@freescale.com --- drivers/net/fec_mxc.c | 2 +- drivers/net/fec_mxc.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 0d0f392..652ced4 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -354,7 +354,7 @@ static int fec_open(struct eth_device *edev) */ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); -#ifdef CONFIG_MX25 +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) udelay(100); /* * setup the MII gasket for RMII mode diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 5d0d69d..1ba5161 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -147,7 +147,7 @@ struct ethernet_regs {
uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */
-#ifdef CONFIG_MX25 +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */ uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */ uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */ @@ -204,7 +204,7 @@ struct ethernet_regs { #define FEC_ECNTRL_RESET 0x00000001 /* reset the FEC */ #define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */
-#ifdef CONFIG_MX25 +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) /* defines for MIIGSK */ /* RMII frequency control: 0=50MHz, 1=5MHz */ #define MIIGSK_CFGR_FRCONT (1 << 6)