A duplicated FPGA loading sequence appears after FPGA reset.
Remove it.
Fixes: dac3c6f625 ("board: cssi: Add new board MCR3000_2G") Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- board/cssi/cmpc885/cmpc885.c | 14 -------------- 1 file changed, 14 deletions(-)
diff --git a/board/cssi/cmpc885/cmpc885.c b/board/cssi/cmpc885/cmpc885.c index 540b9d3c78..02da4d9a87 100644 --- a/board/cssi/cmpc885/cmpc885.c +++ b/board/cssi/cmpc885/cmpc885.c @@ -896,20 +896,6 @@ int board_early_init_r(void) } }
- /* is FPGA firmware loaded ? */ - if (!(in_be32(&cp->cp_pedat) & 0x00000001)) { - printf("Reloading FPGA firmware\n"); - - /* Load FPGA firmware */ - /* Activate PROG_FPGA_FIRMWARE for 1 usec */ - clrbits_be32(&cp->cp_pedat, 0x00000002); - udelay(1); - setbits_be32(&cp->cp_pedat, 0x00000002); - - /* Wait 200ms before checking DONE_FPGA_FIRMWARE */ - mdelay(200); - } - iop_setup_common(); } else { iop_setup_cmpc885();