T S Rajesh wrote:
A bit more info..
When i type "List Area" from the boot monitor code, i get
Base Area Size Blocks Block Size
0x34000000 256k 4 64k 0x34040000 65280k 255 256k 0x30000000 256k 4 64k 0x30040000 65280k 255 256k
whereas in the older boards, i used to get
Base Area Size Blocks Block Size
0x34000000 64M 256 256k
Thanks & Regards Rajesh
T S Rajesh wrote:
Hi All,
I tried with the latest versatile PB926EJ-S (Lead Free Version). The failure i get is: DRAM: 0kb Flash: 0kb Whereas in the old boards, it used to say DRAM: 0kb Flash: 64M
And after that, in the new board, when I try to do a saveenv, it fails with a "start/end address not on sector boundary". The same image works perfectly in the older boards (purchased last year). Anyone came across this problems? Any help on this is greatly appreciated.
Thanks & Regards Rajesh
Hi Rajesh,
It looks like your memory part is different: the original flash has 256 equal size blocks, the new flash is "bottom boot" with four 64K blocks in the lowest 256K area. You probably need to do some configuration (rebuild) u-boot for the different parts.
Beyond this general information I'm afraid I don't have enough knowledge to help.
Best regards, gvb