Hi,
On Thu, Dec 25, 2014 at 6:59 PM, Hans de Goede hdegoede@redhat.com wrote:
Hi,
On 25-12-14 11:00, Chen-Yu Tsai wrote:
Hi,
On Thu, Dec 25, 2014 at 3:06 AM, Hans de Goede hdegoede@redhat.com wrote:
Enable the new LCD support on Ippo_q8h tablets.
Signed-off-by: Hans de Goede hdegoede@redhat.com
configs/Ippo_q8h_v1_2_defconfig | 5 ++++- configs/Ippo_q8h_v5_defconfig | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index fefed32..c773f5f 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -1,7 +1,10 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v1.2.dtb" -CONFIG_VIDEO=n
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_KEYBOARD=n +S:CONFIG_ARM=y +S:CONFIG_ARCH_SUNXI=y diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index b8d3afe..ce4f0b8 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -1,7 +1,10 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v5.dtb" -CONFIG_VIDEO=n
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0"
The display on my Q8H is a bit off to the left. With the simplefb bindings from your kernel sunxi-wip branch, I get a nice console. Though I've no way to type, at least I can tell my tablet is on. :)
Could you briefly explain how to convert the values in the fex file to the mode line here? It could also help others with enabling display on their tablets.
Ah yes, I used the slightly different timings from the olimex 7" lcd panel for olinuxino boards, and since those worked fine on my a23 tablet I never adjusted things. Here is a translation table:
CONFIG_VIDEO_LCD_MODE fex value(s)
x lcd_x y lcd_y depth:18 lcd_frm = 1 pclk_khz lcd_dclk_freq * 1000 hs lcd_hv_hspw (with a minimum of 1) vs lcd_hv_vspw (with a minimum of 1) le lcd_hbp - hs ri lcd_ht - lcd_x - lcd_hbp up lcd_vbp - vs
On sun4i/sun5i/sun7i: lo (lcd_vt / 2) - lcd_y - lcd_vbp On sun8i: lo lcd_vt - lcd_y - lcd_vbp
sync 0 mode 0
I notice that the Ippo_q8h_v5 fex uses 0 for lcd_hv_hspw and lcd_hv_vspw, which is not a valid value as the register value contains hspw - 1, so the minimum is 1, and looking at a register dump under android with my A23 tablet the value indeed should be 1.
So if I'm not mistaken for the Ippo_q8h_v5 the timings should be:
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:0,vmode:0"
The new values look better. I haven't tested displaying anything other than a framebuffer console, so I can't say if the other margins are correct.
I've created a simple wiki page to put the translation table: http://linux-sunxi.org/LCD
Thanks! ChenYu