If SDP_WRITE and SDP_JUMP command addr is zero, use CONFIG_SDP_LOADADDR as default address.
Signed-off-by: Sherry Sun sherry.sun@nxp.com Signed-off-by: Frank Li Frank.Li@nxp.com Reviewed-by: Lukasz Majewski lukma@denx.de --- drivers/usb/gadget/Kconfig | 4 ++++ drivers/usb/gadget/f_sdp.c | 6 ++++-- 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 26b4d12a09..172a82195b 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -115,6 +115,10 @@ config USB_GADGET_VBUS_DRAW This value will be used except for system-specific gadget drivers that have more specific information.
+config SDP_LOADADDR + hex "Default load address at SDP_WRITE and SDP_JUMP" + default 0 + # Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED bool diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c index bcd1c5d47c..841814bc07 100644 --- a/drivers/usb/gadget/f_sdp.c +++ b/drivers/usb/gadget/f_sdp.c @@ -276,7 +276,8 @@ static void sdp_rx_command_complete(struct usb_ep *ep, struct usb_request *req) sdp->error_status = SDP_WRITE_FILE_COMPLETE;
sdp->state = SDP_STATE_RX_FILE_DATA; - sdp->dnl_address = be32_to_cpu(cmd->addr); + sdp->dnl_address = cmd->addr ? be32_to_cpu(cmd->addr) : + CONFIG_SDP_LOADADDR; sdp->dnl_bytes_remaining = be32_to_cpu(cmd->cnt); sdp->dnl_bytes = sdp->dnl_bytes_remaining; sdp->next_state = SDP_STATE_IDLE; @@ -304,7 +305,8 @@ static void sdp_rx_command_complete(struct usb_ep *ep, struct usb_request *req) sdp->always_send_status = false; sdp->error_status = 0;
- sdp->jmp_address = be32_to_cpu(cmd->addr); + sdp->jmp_address = cmd->addr ? be32_to_cpu(cmd->addr) : + CONFIG_SDP_LOADADDR; sdp->state = SDP_STATE_TX_SEC_CONF; sdp->next_state = SDP_STATE_JUMP; break;