From: James Yang James.Yang@freescale.com
Also added a few helper functions for DDR1 & DDR2 to print SPD info and verify the checksum.
Signed-off-by: Kumar Gala galak@kernel.crashing.org --- common/Makefile | 1 + common/ddr_spd.c | 519 +++++++++++++++++++++++++++++++++++++++++++++++++++++ include/ddr_spd.h | 249 +++++++++++++++++++++++++ 3 files changed, 769 insertions(+), 0 deletions(-) create mode 100644 common/ddr_spd.c create mode 100644 include/ddr_spd.h
diff --git a/common/Makefile b/common/Makefile index 4287108..3ea4abf 100644 --- a/common/Makefile +++ b/common/Makefile @@ -144,6 +144,7 @@ COBJS-y += cmd_mac.o COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o COBJS-$(CONFIG_MP) += cmd_mp.o COBJS-$(CONFIG_CMD_SF) += cmd_sf.o +COBJS-$(CONFIG_DDR_SPD) += ddr_spd.o
COBJS := $(COBJS-y) SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/common/ddr_spd.c b/common/ddr_spd.c new file mode 100644 index 0000000..03cbe1d --- /dev/null +++ b/common/ddr_spd.c @@ -0,0 +1,519 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <ddr_spd.h> + +void +ddr1_spd_dump(const ddr1_spd_eeprom_t *spd) +{ + unsigned int i; + + printf("%-3d : %02x %s\n", + 0, spd->info_size, + " spd->info_size, * 0 # bytes written into serial memory *"); + printf("%-3d : %02x %s\n", + 1, spd->chip_size, + " spd->chip_size, * 1 Total # bytes of SPD memory device *"); + printf("%-3d : %02x %s\n", + 2, spd->mem_type, + " spd->mem_type, * 2 Fundamental memory type *"); + printf("%-3d : %02x %s\n", + 3, spd->nrow_addr, + " spd->nrow_addr, * 3 # of Row Addresses on this assembly *"); + printf("%-3d : %02x %s\n", + 4, spd->ncol_addr, + " spd->ncol_addr, * 4 # of Column Addrs on this assembly *"); + printf("%-3d : %02x %s\n", + 5, spd->nrows, + " spd->nrows * 5 # of DIMM Banks *"); + printf("%-3d : %02x %s\n", + 6, spd->dataw_lsb, + " spd->dataw_lsb, * 6 Data Width lsb of this assembly *"); + printf("%-3d : %02x %s\n", + 7, spd->dataw_msb, + " spd->dataw_msb, * 7 Data Width msb of this assembly *"); + printf("%-3d : %02x %s\n", + 8, spd->voltage, + " spd->voltage, * 8 Voltage intf std of this assembly *"); + printf("%-3d : %02x %s\n", + 9, spd->clk_cycle, + " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *"); + printf("%-3d : %02x %s\n", + 10, spd->clk_access, + " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *"); + printf("%-3d : %02x %s\n", + 11, spd->config, + " spd->config, * 11 DIMM Configuration type *"); + printf("%-3d : %02x %s\n", + 12, spd->refresh, + " spd->refresh, * 12 Refresh Rate/Type *"); + printf("%-3d : %02x %s\n", + 13, spd->primw, + " spd->primw, * 13 Primary SDRAM Width *"); + printf("%-3d : %02x %s\n", + 14, spd->ecw, + " spd->ecw, * 14 Error Checking SDRAM width *"); + printf("%-3d : %02x %s\n", + 15, spd->min_delay, + " spd->min_delay, * 15 Back to Back Random Access *"); + printf("%-3d : %02x %s\n", + 16, spd->burstl, + " spd->burstl, * 16 Burst Lengths Supported *"); + printf("%-3d : %02x %s\n", + 17, spd->nbanks, + " spd->nbanks, * 17 # of Banks on Each SDRAM Device *"); + printf("%-3d : %02x %s\n", + 18, spd->cas_lat, + " spd->cas_lat, * 18 CAS# Latencies Supported *"); + printf("%-3d : %02x %s\n", + 19, spd->cs_lat, + " spd->cs_lat, * 19 Chip Select Latency *"); + printf("%-3d : %02x %s\n", + 20, spd->write_lat, + " spd->write_lat, * 20 Write Latency/Recovery *"); + printf("%-3d : %02x %s\n", + 21, spd->mod_attr, + " spd->mod_attr, * 21 SDRAM Module Attributes *"); + printf("%-3d : %02x %s\n", + 22, spd->dev_attr, + " spd->dev_attr, * 22 SDRAM Device Attributes *"); + printf("%-3d : %02x %s\n", + 23, spd->clk_cycle2, + " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *"); + printf("%-3d : %02x %s\n", + 24, spd->clk_access2, + " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *"); + printf("%-3d : %02x %s\n", + 25, spd->clk_cycle3, + " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *"); + printf("%-3d : %02x %s\n", + 26, spd->clk_access3, + " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *"); + printf("%-3d : %02x %s\n", + 27, spd->trp, + " spd->trp, * 27 Min Row Precharge Time (tRP)*"); + printf("%-3d : %02x %s\n", + 28, spd->trrd, + " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *"); + printf("%-3d : %02x %s\n", + 29, spd->trcd, + " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *"); + printf("%-3d : %02x %s\n", + 30, spd->tras, + " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *"); + printf("%-3d : %02x %s\n", + 31, spd->bank_dens, + " spd->bank_dens, * 31 Density of each bank on module *"); + printf("%-3d : %02x %s\n", + 32, spd->ca_setup, + " spd->ca_setup, * 32 Cmd + Addr signal input setup time *"); + printf("%-3d : %02x %s\n", + 33, spd->ca_hold, + " spd->ca_hold, * 33 Cmd and Addr signal input hold time *"); + printf("%-3d : %02x %s\n", + 34, spd->data_setup, + " spd->data_setup, * 34 Data signal input setup time *"); + printf("%-3d : %02x %s\n", + 35, spd->data_hold, + " spd->data_hold, * 35 Data signal input hold time *"); + printf("%-3d : %02x %s\n", + 36, spd->res_36_40[0], + " spd->res_36_40[0], * 36 Reserved / tWR *"); + printf("%-3d : %02x %s\n", + 37, spd->res_36_40[1], + " spd->res_36_40[1], * 37 Reserved / tWTR *"); + printf("%-3d : %02x %s\n", + 38, spd->res_36_40[2], + " spd->res_36_40[2], * 38 Reserved / tRTP *"); + printf("%-3d : %02x %s\n", + 39, spd->res_36_40[3], + " spd->res_36_40[3], * 39 Reserved / mem_probe *"); + printf("%-3d : %02x %s\n", + 40, spd->res_36_40[4], + " spd->res_36_40[4], * 40 Reserved / trc,trfc extensions *"); + printf("%-3d : %02x %s\n", + 41, spd->trc, + " spd->trc, * 41 Min Active to Auto refresh time tRC *"); + printf("%-3d : %02x %s\n", + 42, spd->trfc, + " spd->trfc, * 42 Min Auto to Active period tRFC *"); + printf("%-3d : %02x %s\n", + 43, spd->tckmax, + " spd->tckmax, * 43 Max device cycle time tCKmax *"); + printf("%-3d : %02x %s\n", + 44, spd->tdqsq, + " spd->tdqsq, * 44 Max DQS to DQ skew *"); + printf("%-3d : %02x %s\n", + 45, spd->tqhs, + " spd->tqhs, * 45 Max Read DataHold skew tQHS *"); + printf("%-3d : %02x %s\n", + 46, spd->res_46, + " spd->res_46, * 46 Reserved/ PLL Relock time *"); + printf("%-3d : %02x %s\n", + 47, spd->dimm_height, + " spd->dimm_height * 47 SDRAM DIMM Height *"); + + printf("%-3d-%3d: ", 48, 61); + for (i = 0; i < 14; i++) { + printf("%02x", spd->res_48_61[i]); + } + printf(" * 48-61 IDD in SPD and Reserved space *\n"); + + printf("%-3d : %02x %s\n", + 62, spd->spd_rev, + " spd->spd_rev, * 62 SPD Data Revision Code *"); + printf("%-3d : %02x %s\n", + 63, spd->cksum, + " spd->cksum, * 63 Checksum for bytes 0-62 *"); + printf("%-3d-%3d: ", 64, 71); + + for (i = 0; i < 8; i++) { + printf("%02x", spd->mid[i]); + } + + printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n"); + printf("%-3d : %02x %s\n", + 72, spd->mloc, + " spd->mloc, * 72 Manufacturing Location *"); + + printf("%-3d-%3d: >>", 73, 90); + for (i = 0; i < 18; i++) { + printf("%c", spd->mpart[i]); + } + + printf("<<* 73 Manufacturer's Part Number *\n"); + + printf("%-3d-%3d: %02x %02x %s\n", + 91, 92, spd->rev[0], spd->rev[1], + "* 91 Revision Code *"); + printf("%-3d-%3d: %02x %02x %s\n", + 93, 94, spd->mdate[0], spd->mdate[1], + "* 93 Manufacturing Date *"); + printf("%-3d-%3d: ", 95, 98); + + for (i = 0; i < 4; i++) { + printf("%02x", spd->sernum[i]); + } + printf("* 95 Assembly Serial Number *\n"); + + printf("%-3d-%3d: ", 99, 127); + for (i = 0; i < 27; i++) { + printf("%02x", spd->mspec[i]); + } + + printf("* 99 Manufacturer Specific Data *\n"); +} + +void +ddr2_spd_dump(const ddr2_spd_eeprom_t *spd) +{ + unsigned int i; + + printf("%-3d : %02x %s\n", + 0, spd->info_size, + " spd->info_size, * 0 # bytes written into serial memory *"); + printf("%-3d : %02x %s\n", + 1, spd->chip_size, + " spd->chip_size, * 1 Total # bytes of SPD memory device *"); + printf("%-3d : %02x %s\n", + 2, spd->mem_type, + " spd->mem_type, * 2 Fundamental memory type *"); + printf("%-3d : %02x %s\n", + 3, spd->nrow_addr, + " spd->nrow_addr, * 3 # of Row Addresses on this assembly *"); + printf("%-3d : %02x %s\n", + 4, spd->ncol_addr, + " spd->ncol_addr, * 4 # of Column Addrs on this assembly *"); + printf("%-3d : %02x %s\n", + 5, spd->mod_ranks, + " spd->mod_ranks * 5 # of Module Rows on this assembly *"); + printf("%-3d : %02x %s\n", + 6, spd->dataw, + " spd->dataw, * 6 Data Width of this assembly *"); + printf("%-3d : %02x %s\n", + 7, spd->res_7, + " spd->res_7, * 7 Reserved *"); + printf("%-3d : %02x %s\n", + 8, spd->voltage, + " spd->voltage, * 8 Voltage intf std of this assembly *"); + printf("%-3d : %02x %s\n", + 9, spd->clk_cycle, + " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *"); + printf("%-3d : %02x %s\n", + 10, spd->clk_access, + " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *"); + printf("%-3d : %02x %s\n", + 11, spd->config, + " spd->config, * 11 DIMM Configuration type *"); + printf("%-3d : %02x %s\n", + 12, spd->refresh, + " spd->refresh, * 12 Refresh Rate/Type *"); + printf("%-3d : %02x %s\n", + 13, spd->primw, + " spd->primw, * 13 Primary SDRAM Width *"); + printf("%-3d : %02x %s\n", + 14, spd->ecw, + " spd->ecw, * 14 Error Checking SDRAM width *"); + printf("%-3d : %02x %s\n", + 15, spd->res_15, + " spd->res_15, * 15 Reserved *"); + printf("%-3d : %02x %s\n", + 16, spd->burstl, + " spd->burstl, * 16 Burst Lengths Supported *"); + printf("%-3d : %02x %s\n", + 17, spd->nbanks, + " spd->nbanks, * 17 # of Banks on Each SDRAM Device *"); + printf("%-3d : %02x %s\n", + 18, spd->cas_lat, + " spd->cas_lat, * 18 CAS# Latencies Supported *"); + printf("%-3d : %02x %s\n", + 19, spd->mech_char, + " spd->mech_char, * 19 Mechanical Characteristics *"); + printf("%-3d : %02x %s\n", + 20, spd->dimm_type, + " spd->dimm_type, * 20 DIMM type *"); + printf("%-3d : %02x %s\n", + 21, spd->mod_attr, + " spd->mod_attr, * 21 SDRAM Module Attributes *"); + printf("%-3d : %02x %s\n", + 22, spd->dev_attr, + " spd->dev_attr, * 22 SDRAM Device Attributes *"); + printf("%-3d : %02x %s\n", + 23, spd->clk_cycle2, + " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *"); + printf("%-3d : %02x %s\n", + 24, spd->clk_access2, + " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *"); + printf("%-3d : %02x %s\n", + 25, spd->clk_cycle3, + " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *"); + printf("%-3d : %02x %s\n", + 26, spd->clk_access3, + " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *"); + printf("%-3d : %02x %s\n", + 27, spd->trp, + " spd->trp, * 27 Min Row Precharge Time (tRP)*"); + printf("%-3d : %02x %s\n", + 28, spd->trrd, + " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *"); + printf("%-3d : %02x %s\n", + 29, spd->trcd, + " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *"); + printf("%-3d : %02x %s\n", + 30, spd->tras, + " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *"); + printf("%-3d : %02x %s\n", + 31, spd->rank_dens, + " spd->rank_dens, * 31 Density of each rank on module *"); + printf("%-3d : %02x %s\n", + 32, spd->ca_setup, + " spd->ca_setup, * 32 Cmd + Addr signal input setup time *"); + printf("%-3d : %02x %s\n", + 33, spd->ca_hold, + " spd->ca_hold, * 33 Cmd and Addr signal input hold time *"); + printf("%-3d : %02x %s\n", + 34, spd->data_setup, + " spd->data_setup, * 34 Data signal input setup time *"); + printf("%-3d : %02x %s\n", + 35, spd->data_hold, + " spd->data_hold, * 35 Data signal input hold time *"); + printf("%-3d : %02x %s\n", + 36, spd->twr, + " spd->twr, * 36 Write Recovery time tWR *"); + printf("%-3d : %02x %s\n", + 37, spd->twtr, + " spd->twtr, * 37 Int write to read delay tWTR *"); + printf("%-3d : %02x %s\n", + 38, spd->trtp, + " spd->trtp, * 38 Int read to precharge delay tRTP *"); + printf("%-3d : %02x %s\n", + 39, spd->mem_probe, + " spd->mem_probe, * 39 Mem analysis probe characteristics *"); + printf("%-3d : %02x %s\n", + 40, spd->trctrfc_ext, + " spd->trctrfc_ext, * 40 Extensions to trc and trfc *"); + printf("%-3d : %02x %s\n", + 41, spd->trc, + " spd->trc, * 41 Min Active to Auto refresh time tRC *"); + printf("%-3d : %02x %s\n", + 42, spd->trfc, + " spd->trfc, * 42 Min Auto to Active period tRFC *"); + printf("%-3d : %02x %s\n", + 43, spd->tckmax, + " spd->tckmax, * 43 Max device cycle time tCKmax *"); + printf("%-3d : %02x %s\n", + 44, spd->tdqsq, + " spd->tdqsq, * 44 Max DQS to DQ skew *"); + printf("%-3d : %02x %s\n", + 45, spd->tqhs, + " spd->tqhs, * 45 Max Read DataHold skew tQHS *"); + printf("%-3d : %02x %s\n", + 46, spd->pll_relock, + " spd->pll_relock, * 46 PLL Relock time *"); + printf("%-3d : %02x %s\n", + 47, spd->Tcasemax, + " spd->Tcasemax, * 47 Tcasemax *"); + printf("%-3d : %02x %s\n", + 48, spd->psiTAdram, + " spd->psiTAdram, * 48 Thermal Resistance of DRAM Package " + "from Top (Case) to Ambient (Psi T-A DRAM) *"); + printf("%-3d : %02x %s\n", + 49, spd->dt0_mode, + " spd->dt0_mode, * 49 DRAM Case Temperature Rise from " + "Ambient due to Activate-Precharge/Mode Bits " + "(DT0/Mode Bits) *)"); + printf("%-3d : %02x %s\n", + 50, spd->dt2n_dt2q, + " spd->dt2n_dt2q, * 50 DRAM Case Temperature Rise from " + "Ambient due to Precharge/Quiet Standby " + "(DT2N/DT2Q) *"); + printf("%-3d : %02x %s\n", + 51, spd->dt2p, + " spd->dt2p, * 51 DRAM Case Temperature Rise from " + "Ambient due to Precharge Power-Down (DT2P) *"); + printf("%-3d : %02x %s\n", + 52, spd->dt3n, + " spd->dt3n, * 52 DRAM Case Temperature Rise from " + "Ambient due to Active Standby (DT3N) *"); + printf("%-3d : %02x %s\n", + 53, spd->dt3pfast, + " spd->dt3pfast, * 53 DRAM Case Temperature Rise from " + "Ambient due to Active Power-Down with Fast PDN Exit " + "(DT3Pfast) *"); + printf("%-3d : %02x %s\n", + 54, spd->dt3pslow, + " spd->dt3pslow, * 54 DRAM Case Temperature Rise from " + "Ambient due to Active Power-Down with Slow PDN Exit " + "(DT3Pslow) *"); + printf("%-3d : %02x %s\n", + 55, spd->dt4r_dt4r4w, + " spd->dt4r_dt4r4w, * 55 DRAM Case Temperature Rise from " + "Ambient due to Page Open Burst Read/DT4R4W Mode Bit " + "(DT4R/DT4R4W Mode Bit) *"); + printf("%-3d : %02x %s\n", + 56, spd->dt5b, + " spd->dt5b, * 56 DRAM Case Temperature Rise from " + "Ambient due to Burst Refresh (DT5B) *"); + printf("%-3d : %02x %s\n", + 57, spd->dt7, + " spd->dt7, * 57 DRAM Case Temperature Rise from " + "Ambient due to Bank Interleave Reads with " + "Auto-Precharge (DT7) *"); + printf("%-3d : %02x %s\n", + 58, spd->psiTApll, + " spd->psiTApll, * 58 Thermal Resistance of PLL Package form" + " Top (Case) to Ambient (Psi T-A PLL) *"); + printf("%-3d : %02x %s\n", + 59, spd->psiTAreg, + " spd->psiTAreg, * 59 Thermal Reisitance of Register Package" + " from Top (Case) to Ambient (Psi T-A Register) *"); + printf("%-3d : %02x %s\n", + 60, spd->dtpllactive, + " spd->dtpllactive, * 60 PLL Case Temperature Rise from " + "Ambient due to PLL Active (DT PLL Active) *"); + printf("%-3d : %02x %s\n", + 61, spd->dtregact, + " spd->dtregact, " + "* 61 Register Case Temperature Rise from Ambient due to " + "Register Active/Mode Bit (DT Register Active/Mode Bit) *"); + printf("%-3d : %02x %s\n", + 62, spd->spd_rev, + " spd->spd_rev, * 62 SPD Data Revision Code *"); + printf("%-3d : %02x %s\n", + 63, spd->cksum, + " spd->cksum, * 63 Checksum for bytes 0-62 *"); + printf("%-3d-%3d: ", 64, 71); + + for (i = 0; i < 8; i++) { + printf("%02x", spd->mid[i]); + } + + printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n"); + printf("%-3d : %02x %s\n", + 72, spd->mloc, + " spd->mloc, * 72 Manufacturing Location *"); + + printf("%-3d-%3d: >>", 73, 90); + for (i = 0; i < 18; i++) { + printf("%c", spd->mpart[i]); + } + + printf("<<* 73 Manufacturer's Part Number *\n"); + + printf("%-3d-%3d: %02x %02x %s\n", + 91, 92, spd->rev[0], spd->rev[1], + "* 91 Revision Code *"); + printf("%-3d-%3d: %02x %02x %s\n", + 93, 94, spd->mdate[0], spd->mdate[1], + "* 93 Manufacturing Date *"); + printf("%-3d-%3d: ", 95, 98); + + for (i = 0; i < 4; i++) { + printf("%02x", spd->sernum[i]); + } + printf("* 95 Assembly Serial Number *\n"); + + printf("%-3d-%3d: ", 99, 127); + for (i = 0; i < 27; i++) { + printf("%02x", spd->mspec[i]); + } + + printf("* 99 Manufacturer Specific Data *\n"); +} + +/* used for ddr1 and ddr2 spd */ +static int +spd_check(const u8 *buf, u8 spd_rev, u8 spd_cksum) +{ + unsigned int cksum = 0; + unsigned int i; + + /* + * Check SPD revision supported + * Rev 1.2 or less supported by this code + */ + if (spd_rev > 0x12) { + printf("SPD revision %02X not supported by this code\n", + spd_rev); + return 1; + } + + /* + * Calculate checksum + */ + for (i = 0; i < 63; i++) { + cksum += *buf++; + } + cksum &= 0xFF; + + if (cksum != spd_cksum) { + printf("SPD checksum unexpected. " + "Checksum in SPD = %02X, computed SPD = %02X\n", + spd_cksum, cksum); + return 1; + } + + return 0; +} + +unsigned int +ddr1_spd_check(const ddr1_spd_eeprom_t *spd) +{ + const u8 *p = (const u8 *)spd; + + return spd_check(p, spd->spd_rev, spd->cksum); +} + +unsigned int +ddr2_spd_check(const ddr2_spd_eeprom_t *spd) +{ + const u8 *p = (const u8 *)spd; + + return spd_check(p, spd->spd_rev, spd->cksum); +} diff --git a/include/ddr_spd.h b/include/ddr_spd.h new file mode 100644 index 0000000..1a1c99b --- /dev/null +++ b/include/ddr_spd.h @@ -0,0 +1,249 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#ifndef _DDR_SPD_H_ +#define _DDR_SPD_H_ + +/* + * Format from "JEDEC Standard No. 21-C, + * Appendix D: Rev 1.0: SPD's for DDR SDRAM + */ +typedef struct ddr1_spd_eeprom_s { + unsigned char info_size; /* 0 # bytes written into serial memory */ + unsigned char chip_size; /* 1 Total # bytes of SPD memory device */ + unsigned char mem_type; /* 2 Fundamental memory type */ + unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */ + unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */ + unsigned char nrows; /* 5 Number of DIMM Banks */ + unsigned char dataw_lsb; /* 6 Data Width of this assembly */ + unsigned char dataw_msb; /* 7 ... Data Width continuation */ + unsigned char voltage; /* 8 Voltage intf std of this assembly */ + unsigned char clk_cycle; /* 9 SDRAM Cycle time at CL=X */ + unsigned char clk_access; /* 10 SDRAM Access from Clock at CL=X (tAC) */ + unsigned char config; /* 11 DIMM Configuration type */ + unsigned char refresh; /* 12 Refresh Rate/Type */ + unsigned char primw; /* 13 Primary SDRAM Width */ + unsigned char ecw; /* 14 Error Checking SDRAM width */ + unsigned char min_delay; /* 15 for Back to Back Random Address */ + unsigned char burstl; /* 16 Burst Lengths Supported */ + unsigned char nbanks; /* 17 # of Banks on SDRAM Device */ + unsigned char cas_lat; /* 18 CAS# Latencies Supported */ + unsigned char cs_lat; /* 19 CS# Latency */ + unsigned char write_lat; /* 20 Write Latency (aka Write Recovery) */ + unsigned char mod_attr; /* 21 SDRAM Module Attributes */ + unsigned char dev_attr; /* 22 SDRAM Device Attributes */ + unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time at CL=X-0.5 */ + unsigned char clk_access2; /* 24 SDRAM Access from Clock at CL=X-0.5 (tAC) */ + unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time at CL=X-1 */ + unsigned char clk_access3; /* 26 Max Access from Clock at CL=X-1 (tAC) */ + unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/ + unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */ + unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */ + unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */ + unsigned char bank_dens; /* 31 Density of each bank on module */ + unsigned char ca_setup; /* 32 Addr + Cmd Setup Time Before Clock */ + unsigned char ca_hold; /* 33 Addr + Cmd Hold Time After Clock */ + unsigned char data_setup; /* 34 Data Input Setup Time Before Strobe */ + unsigned char data_hold; /* 35 Data Input Hold Time After Strobe */ + unsigned char res_36_40[5];/* 36-40 reserved for VCSDRAM */ + unsigned char trc; /* 41 Min Active to Auto refresh time tRC */ + unsigned char trfc; /* 42 Min Auto to Active period tRFC */ + unsigned char tckmax; /* 43 Max device cycle time tCKmax */ + unsigned char tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */ + unsigned char tqhs; /* 45 Max Read DataHold skew (tQHS) */ + unsigned char res_46; /* 46 Reserved */ + unsigned char dimm_height; /* 47 DDR SDRAM DIMM Height */ + unsigned char res_48_61[14]; /* 48-61 Reserved */ + unsigned char spd_rev; /* 62 SPD Data Revision Code */ + unsigned char cksum; /* 63 Checksum for bytes 0-62 */ + unsigned char mid[8]; /* 64-71 Mfr's JEDEC ID code per JEP-106 */ + unsigned char mloc; /* 72 Manufacturing Location */ + unsigned char mpart[18]; /* 73 Manufacturer's Part Number */ + unsigned char rev[2]; /* 91 Revision Code */ + unsigned char mdate[2]; /* 93 Manufacturing Date */ + unsigned char sernum[4]; /* 95 Assembly Serial Number */ + unsigned char mspec[27]; /* 99-127 Manufacturer Specific Data */ + +} ddr1_spd_eeprom_t; + +/* + * Format from "JEDEC Appendix X: Serial Presence Detects for DDR2 SDRAM", + * SPD Revision 1.2 + */ +typedef struct ddr2_spd_eeprom_s { + unsigned char info_size; /* 0 # bytes written into serial memory */ + unsigned char chip_size; /* 1 Total # bytes of SPD memory device */ + unsigned char mem_type; /* 2 Fundamental memory type */ + unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */ + unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */ + unsigned char mod_ranks; /* 5 Number of DIMM Ranks */ + unsigned char dataw; /* 6 Module Data Width */ + unsigned char res_7; /* 7 Reserved */ + unsigned char voltage; /* 8 Voltage intf std of this assembly */ + unsigned char clk_cycle; /* 9 SDRAM Cycle time at CL=X */ + unsigned char clk_access; /* 10 SDRAM Access from Clock at CL=X (tAC) */ + unsigned char config; /* 11 DIMM Configuration type */ + unsigned char refresh; /* 12 Refresh Rate/Type */ + unsigned char primw; /* 13 Primary SDRAM Width */ + unsigned char ecw; /* 14 Error Checking SDRAM width */ + unsigned char res_15; /* 15 Reserved */ + unsigned char burstl; /* 16 Burst Lengths Supported */ + unsigned char nbanks; /* 17 # of Banks on Each SDRAM Device */ + unsigned char cas_lat; /* 18 CAS# Latencies Supported */ + unsigned char mech_char; /* 19 DIMM Mechanical Characteristics */ + unsigned char dimm_type; /* 20 DIMM type information */ + unsigned char mod_attr; /* 21 SDRAM Module Attributes */ + unsigned char dev_attr; /* 22 SDRAM Device Attributes */ + unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time at CL=X-1 */ + unsigned char clk_access2; /* 24 SDRAM Access from Clock at CL=X-1 (tAC) */ + unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time at CL=X-2 */ + unsigned char clk_access3; /* 26 Max Access from Clock at CL=X-2 (tAC) */ + unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/ + unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */ + unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */ + unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */ + unsigned char rank_dens; /* 31 Density of each rank on module */ + unsigned char ca_setup; /* 32 Addr + Cmd Setup Time Before Clock (tIS) */ + unsigned char ca_hold; /* 33 Addr + Cmd Hold Time After Clock (tIH) */ + unsigned char data_setup; /* 34 Data Input Setup Time Before Strobe (tDS) */ + unsigned char data_hold; /* 35 Data Input Hold Time After Strobe (tDH) */ + unsigned char twr; /* 36 Write Recovery time tWR */ + unsigned char twtr; /* 37 Int write to read delay tWTR */ + unsigned char trtp; /* 38 Int read to precharge delay tRTP */ + unsigned char mem_probe; /* 39 Mem analysis probe characteristics */ + unsigned char trctrfc_ext; /* 40 Extensions to trc and trfc */ + unsigned char trc; /* 41 Min Active to Auto refresh time tRC */ + unsigned char trfc; /* 42 Min Auto to Active period tRFC */ + unsigned char tckmax; /* 43 Max device cycle time tCKmax */ + unsigned char tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */ + unsigned char tqhs; /* 45 Max Read DataHold skew (tQHS) */ + unsigned char pll_relock; /* 46 PLL Relock time */ + unsigned char Tcasemax; /* 47 Tcasemax */ + unsigned char psiTAdram; /* 48 Thermal Resistance of DRAM Package from Top (Case) to Ambient (Psi T-A DRAM) */ + unsigned char dt0_mode; /* 49 DRAM Case Temperature Rise from Ambient due to Activate-Precharge/Mode Bits (DT0/Mode Bits) */ + unsigned char dt2n_dt2q; /* 50 DRAM Case Temperature Rise from Ambient due to Precharge/Quiet Standby (DT2N/DT2Q) */ + unsigned char dt2p; /* 51 DRAM Case Temperature Rise from Ambient due to Precharge Power-Down (DT2P) */ + unsigned char dt3n; /* 52 DRAM Case Temperature Rise from Ambient due to Active Standby (DT3N) */ + unsigned char dt3pfast; /* 53 DRAM Case Temperature Rise from Ambient due to Active Power-Down with Fast PDN Exit (DT3Pfast) */ + unsigned char dt3pslow; /* 54 DRAM Case Temperature Rise from Ambient due to Active Power-Down with Slow PDN Exit (DT3Pslow) */ + unsigned char dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from Ambient due to Page Open Burst Read/DT4R4W Mode Bit (DT4R/DT4R4W Mode Bit) */ + unsigned char dt5b; /* 56 DRAM Case Temperature Rise from Ambient due to Burst Refresh (DT5B) */ + unsigned char dt7; /* 57 DRAM Case Temperature Rise from Ambient due to Bank Interleave Reads with Auto-Precharge (DT7) */ + unsigned char psiTApll; /* 58 Thermal Resistance of PLL Package form Top (Case) to Ambient (Psi T-A PLL) */ + unsigned char psiTAreg; /* 59 Thermal Reisitance of Register Package from Top (Case) to Ambient (Psi T-A Register) */ + unsigned char dtpllactive; /* 60 PLL Case Temperature Rise from Ambient due to PLL Active (DT PLL Active) */ + unsigned char dtregact; /* 61 Register Case Temperature Rise from Ambient due to Register Active/Mode Bit (DT Register Active/Mode Bit) */ + + unsigned char spd_rev; /* 62 SPD Data Revision Code */ + unsigned char cksum; /* 63 Checksum for bytes 0-62 */ + unsigned char mid[8]; /* 64 Mfr's JEDEC ID code per JEP-106 */ + unsigned char mloc; /* 72 Manufacturing Location */ + unsigned char mpart[18]; /* 73 Manufacturer's Part Number */ + unsigned char rev[2]; /* 91 Revision Code */ + unsigned char mdate[2]; /* 93 Manufacturing Date */ + unsigned char sernum[4]; /* 95 Assembly Serial Number */ + unsigned char mspec[27]; /* 99-127 Manufacturer Specific Data */ + +} ddr2_spd_eeprom_t; + +typedef struct ddr3_spd_eeprom_s { + /* General Section: Bytes 0-59 */ + unsigned char info_size_crc; /* 0 # bytes written into serial memory, CRC coverage */ + unsigned char spd_rev; /* 1 Total # bytes of SPD memory device */ + unsigned char mem_type; /* 2 Key Byte / Fundamental memory type */ + unsigned char module_type; /* 3 Key Byte / Module Type */ + unsigned char density_banks; /* 4 SDRAM Density and Banks */ + unsigned char addressing; /* 5 SDRAM Addressing */ + unsigned char res_6; /* 6 Reserved */ + unsigned char organization; /* 7 Module Organization */ + unsigned char bus_width; /* 8 Module Memory Bus Width */ + unsigned char ftb_div; /* 9 Fine Timebase (FTB) Dividend / Divisor */ + unsigned char mtb_dividend; /* 10 Medium Timebase (MTB) Dividend */ + unsigned char mtb_divisor; /* 11 Medium Timebase (MTB) Divisor */ + unsigned char tCK_min; /* 12 SDRAM Minimum Cycle Time (tCK_min) */ + unsigned char res_13; /* 13 Reserved */ + unsigned char caslat_lsb; /* 14 CAS Latencies Supported, Least Significant Byte */ + unsigned char caslat_msb; /* 15 CAS Latencies Supported, Most Significant Byte */ + unsigned char tAA_min; /* 16 Minimum CAS Latency Time (tAA_min) */ + unsigned char tWR_min; /* 17 Minimum WRite REcovery Time (tWR_min) */ + unsigned char tRCD_min; /* 18 Minimum RAS# to CAS# Delay Time (tRCD_min) */ + unsigned char tRRD_min; /* 19 Minimum Row Active to Row Active Delay Time (tRRD_min) */ + unsigned char tRP_min; /* 20 Minimum Row Precharge Delay Time (tRP_min) */ + unsigned char tRAS_tRC_ext; /* 21 Upper Nibbles for tRAS and tRC */ + unsigned char tRAS_min_lsb; /* 22 Minimum Active to Precharge Delay Time (tRAS_min), LSB */ + unsigned char tRC_min_lsb; /* 23 Minimum Active to Active/Refresh Delay Time (tRC_min), LSB */ + unsigned char tRFC_min_lsb; /* 24 Minimum Refresh Recovery Delay Time (tRFC_min), LSB */ + unsigned char tRFC_min_msb; /* 25 Minimum Refresh Recovery Delay Time (tRFC_min), MSB */ + unsigned char tWTR_min; /* 26 Minimum Internal Write to Read Command Delay Time (tWTR_min) */ + unsigned char tRTP_min; /* 27 Minimum Internal Read to Precharge Command Delay Time (tRTP_min) */ + unsigned char tFAW_msb; /* 28 Upper Nibble for tFAW */ + unsigned char tFAW_min; /* 29 Minimum Four Activate Window Delay Time (tFAW_min), LSB */ + unsigned char opt_features; /* 30 SDRAM Optional Features */ + unsigned char therm_ref_opt; /* 31 SDRAM Thermal and Refresh Options */ + unsigned char res_32_59[28]; /* 32-59 Reserved, General Section */ + + /* Module-Specific Section: Bytes 60-116 */ + union { + struct { + unsigned char mod_height; /* 60 (Unbuffered) Module Nominal Height */ + unsigned char mod_thickness; /* 61 (Unbuffered) Module Maximum Thickness */ + unsigned char ref_raw_card; /* 62 (Unbuffered) Reference Raw Card Used */ + unsigned char addr_mapping; /* 63 (Unbuffered) Address Mapping from Edge Connector to DRAM */ + unsigned char res_64_116[53]; /* 64-116 (Unbuffered) Reserved */ + } unbuffered; + struct { + unsigned char mod_height; /* 60 (Registered) Module Nominal Height */ + unsigned char mod_thickness; /* 61 (Registered) Module Maximum Thickness */ + unsigned char ref_raw_card; /* 62 (Registered) Reference Raw Card Used */ + } registered; + unsigned char uc[57]; /* 60-116 Module-Specific Section */ + } mod_section; + + /* Unique Module ID: Bytes 117-125 */ + unsigned char mmid_lsb; /* 117 Module Manufacturer ID Code LSB - JEP-106 */ + unsigned char mmid_msb; /* 118 Module Manufacturer ID Code MSB - JEP-106 */ + unsigned char mloc; /* 119 Manufacturing Location */ + unsigned char mdate[2]; /* 120-121 Manufacturing Date */ + unsigned char sernum[4]; /* 122-125 Module Serial Number */ + + /* CRC: Bytes 126-127 */ + unsigned char crc[2]; /* 126-127 SPD Cyclical Redundancy Code (CRC) */ + + /* Other Manufacturer Fields and User Space: Bytes 128-255 */ + unsigned char mpart[18]; /* 128-145 Manufacturer's Module Part Number */ + unsigned char mrev[2]; /* 146-147 Module Revision Code */ + + unsigned char dmid_lsb; /* 148 DRAM Manufacturer ID Code LSB - JEP-106 */ + unsigned char dmid_msb; /* 149 DRAM Manufacturer ID Code MSB - JEP-106 */ + + unsigned char msd[26]; /* 150-175 Manufacturer's Specific Data */ + unsigned char cust[80]; /* 176-255 Open for Customer Use */ + +} ddr3_spd_eeprom_t; + +extern unsigned int ddr1_spd_check(const ddr1_spd_eeprom_t *spd); +extern void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd); +extern unsigned int ddr2_spd_check(const ddr2_spd_eeprom_t *spd); +extern void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd); + +/* + * Byte 2 Fundamental Memory Types. + */ +#define SPD_MEMTYPE_FPM (0x01) +#define SPD_MEMTYPE_EDO (0x02) +#define SPD_MEMTYPE_PIPE_NIBBLE (0x03) +#define SPD_MEMTYPE_SDRAM (0x04) +#define SPD_MEMTYPE_ROM (0x05) +#define SPD_MEMTYPE_SGRAM (0x06) +#define SPD_MEMTYPE_DDR (0x07) +#define SPD_MEMTYPE_DDR2 (0x08) +#define SPD_MEMTYPE_DDR2_FBDIMM (0x09) +#define SPD_MEMTYPE_DDR2_FBDIMM_PROBE (0x0A) +#define SPD_MEMTYPE_DDR3 (0x0B) + +#endif /* _DDR_SPD_H_ */