The initialization of the NAND in SPL hard-coded ecc.bytes, ecc.size, and ecc.strength which may work for some NAND parts, but it not appropriate for others. With the pending patch "mxs_nand: Fix BCH read timeout error on boards requiring ECC" the driver can auto configure the ECC when these entries are blank. This patch has been tested in NAND flash with oob 64 and oob 128.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index 2d84bfffe2..95fa452cef 100644 --- a/drivers/mtd/nand/raw/mxs_nand.c +++ b/drivers/mtd/nand/raw/mxs_nand.c @@ -1191,9 +1191,6 @@ int mxs_nand_init_spl(struct nand_chip *nand) nand->ecc.read_page = mxs_nand_ecc_read_page;
nand->ecc.mode = NAND_ECC_HW; - nand->ecc.bytes = 9; - nand->ecc.size = 512; - nand->ecc.strength = 8;
return 0; }