On 18.7.2018 10:56, Siva Durga Prasad Paladugu wrote:
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial.
Signed-off-by: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
This patch is based on series "[PATCH v6 0/5] Add support for reading memory configuration from DT at run-time"
arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-mini-qspi.dts | 95 +++++++++++++++++++++++++++++++ configs/xilinx_zynqmp_mini_qspi_defconfig | 61 ++++++++++++++++++++ include/configs/xilinx_zynqmp_mini_qspi.h | 22 +++++++ 4 files changed, 179 insertions(+) create mode 100644 arch/arm/dts/zynqmp-mini-qspi.dts create mode 100644 configs/xilinx_zynqmp_mini_qspi_defconfig create mode 100644 include/configs/xilinx_zynqmp_mini_qspi.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9607239..b62670b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -150,6 +150,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ zynqmp-mini-nand.dtb \
- zynqmp-mini-qspi.dtb \ zynqmp-zcu100-revC.dtb \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \
diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts new file mode 100644 index 0000000..3267021 --- /dev/null +++ b/arch/arm/dts/zynqmp-mini-qspi.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- dts file for Xilinx ZynqMP Mini Configuration
- (C) Copyright 2018, Xilinx, Inc.
This was done in 2015. It means 2015 - 2018
- Siva Durga Prasad siva.durga.paladugu@xilinx.com
- Michal Simek michal.simek@xilinx.com
- */
+/dts-v1/;
+/ {
- model = "ZynqMP MINI QSPI";
- compatible = "xlnx,zynqmp";
- #address-cells = <2>;
- #size-cells = <1>;
- aliases {
serial0 = &dcc;spi0 = &qspi;- };
- chosen {
stdout-path = "serial0:115200n8";- };
- memory@0 {
This should be memory@fffc0000
device_type = "memory";reg = <0x0 0xfffc0000 0x40000>;- };
- dcc: dcc {
compatible = "arm,dcc";status = "disabled";u-boot,dm-pre-reloc;- };
- amba: amba {
compatible = "simple-bus";#address-cells = <2>;#size-cells = <1>;ranges;qspi: spi@ff0f0000 {compatible = "xlnx,zynqmp-qspi-1.0";status = "disabled";clock-names = "ref_clk", "pclk";clocks = <&misc_clk &misc_clk>;num-cs = <1>;reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;#address-cells = <1>;#size-cells = <0>;};misc_clk: misc_clk {compatible = "fixed-clock";#clock-cells = <0>;clock-frequency = <125000000>;};- };
+};
+&qspi {
- status = "okay";
- flash@0 {
compatible = "n25q512a11";#address-cells = <1>;#size-cells = <1>;reg = <0x0>;spi-tx-bus-width = <1>;spi-rx-bus-width = <4>;spi-max-frequency = <10000000>;partition@qspi-fsbl-uboot { /* for testing purpose */label = "qspi-fsbl-uboot";reg = <0x0 0x100000>;};partition@qspi-linux { /* for testing purpose */label = "qspi-linux";reg = <0x100000 0x500000>;};partition@qspi-device-tree { /* for testing purpose */label = "qspi-device-tree";reg = <0x600000 0x20000>;};partition@qspi-rootfs { /* for testing purpose */label = "qspi-rootfs";reg = <0x620000 0x5E0000>;};
we should probably removed this partition setting because none is using it.
- };
+};
+&dcc {
- status = "okay";
+}; diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig new file mode 100644 index 0000000..745a550 --- /dev/null +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -0,0 +1,61 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_qspi" +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0xFFFC0000 +CONFIG_SYS_MEM_RSVD_FOR_MMU=y +CONFIG_ZYNQMP_NO_DDR=y +CONFIG_DEFINE_TCM_OCM_MMAP=y +# CONFIG_CMD_ZYNQMP is not set +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi" +# CONFIG_IMAGE_FORMAT_LEGACY is not set +CONFIG_BOOTDELAY=-1 +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMDLINE_EDITING is not set +# CONFIG_AUTO_COMPLETE is not set +# CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_BOOTI is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_FDT is not set +# CONFIG_CMD_GO is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_DM is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_PARTITIONS is not set +CONFIG_OF_EMBED=y +# CONFIG_NET is not set +# CONFIG_DM_WARN is not set +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_MMC is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_ZYNQMP_GQSPI=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/xilinx_zynqmp_mini_qspi.h b/include/configs/xilinx_zynqmp_mini_qspi.h new file mode 100644 index 0000000..03d213b --- /dev/null +++ b/include/configs/xilinx_zynqmp_mini_qspi.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Configuration for Xilinx ZynqMP QSPI Flash utility
- (C) Copyright 2018 Xilinx, Inc.
- Michal Simek michal.simek@xilinx.com
- Siva Durga Prasad Paladugu sivadur@xilinx.com
- */
+#ifndef __CONFIG_ZYNQMP_MINI_QSPI_H +#define __CONFIG_ZYNQMP_MINI_QSPI_H
+#include <configs/xilinx_zynqmp_mini.h>
+#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_ENV_SIZE 1400
This is moved to Kconfig now. Look at Vipuls patch
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x20000) +#define CONFIG_SYS_MALLOC_LEN 0x2000 +#define CONFIG_MP
We don't want this for this configuration.
Thanks, Michal