Hi,
Maybe put this Rockchip rk3066 patch on hold, if we can find a better solution. Any insider help is appreciated here.
The idea to test BOOT_BROM_DOWNLOAD comes from 30_LPDDR2_300MHz_DD.bin Setting location 0x10080028 only breaks the inner loop. BOOT_BROM_DOWNLOAD flag is not reset. It continues testing for boot blocks on NAND till nothing is left. For NAND up to 50 erase blocks are tested
struct func_array function_table[4] = { { &NAND_INIT, &NAND_READ_BLK, &NAND_READ_HEADER, &NAND_GET_PAGE, 50 }, { &SPI0_INIT, &SPI_READ_BLK, &SPI_READ_HEADER, &SPI_GET_PAGE, 13 }, { &SPI1_INIT, &SPI_READ_BLK, &SPI_READ_HEADER, &SPI_GET_PAGE, 13 }, { &EMMC_INIT, &EMMC_READ_BLK, &EMMC_READ_HEADER, &EMMC_GET_PAGE, 1 } };
Given below part of rk3066 BROM main read loop.
Proposal 1: In case of BOOT_BROM_DOWNLOAD return to 0x1100 instead of 0x1058. Also reset flag.
//////////
In case this TPL binary is reused to upload and to store this TPL entry function can be called from 3 to 4 BROM functions. Only when data comes from SPI, NAND or EMMC it needs to early return to BROM. In download mode this section is skipped when the lr register address is not in the functions that handles USB OTG and UART0.
Proposal 2: Instead of a retry_counter test LR: 0x1058. In all other cases skip early return
Let me know your ideas/advice! How rk3188 handle return flag?
Johan
/////////////////////////
//main read loop rk3066 bootrom
db4: e92d4ff3 push {r0, r1, r4, r5, r6, r7, r8, r9, sl, fp, lr}
[..]
1050: 02840004 addeq r0, r4, #4 1054: 012fff30 blxeq r0
// Branch to U-boot TPL early // LR: 0x1058 // In case of BOOT_BROM_DOWNLOAD return to 0x1100 instead of 0x1058.
1058: e3a01c02 mov r1, #512 @ 0x200 105c: e2840b01 add r0, r4, #1024 @ 0x400 1060: ebfffc49 bl 0x18c 1064: e3a01c02 mov r1, #512 @ 0x200 1068: e2840c06 add r0, r4, #1536 @ 0x600 106c: ebfffc46 bl 0x18c 1070: e2490004 sub r0, r9, #4 1074: e1560000 cmp r6, r0 1078: 12844b02 addne r4, r4, #2048 @ 0x800 107c: 1a000012 bne 0x10cc 1080: e59f10cc ldr r1, [pc, #204] @ 0x1154 1084: e59f00d0 ldr r0, [pc, #208] @ 0x115c 1088: e5d13000 ldrb r3, [r1] 108c: e5d02000 ldrb r2, [r0] 1090: e1530002 cmp r3, r2 1094: 05d12001 ldrbeq r2, [r1, #1] 1098: 05d03001 ldrbeq r3, [r0, #1] 109c: 01520003 cmpeq r2, r3 10a0: 1a00000d bne 0x10dc 10a4: e5d12002 ldrb r2, [r1, #2] 10a8: e5d03002 ldrb r3, [r0, #2] 10ac: e1520003 cmp r2, r3 10b0: 05d00003 ldrbeq r0, [r0, #3] 10b4: 05d12003 ldrbeq r2, [r1, #3] 10b8: 01520000 cmpeq r2, r0 10bc: 1a000006 bne 0x10dc
10c0: e2810004 add r0, r1, #4 10c4: e12fff30 blx r0
// Branch to U-boot TPL full // LR2: 0x10c8
10c8: e3a04206 mov r4, #1610612736 @ 0x60000000 10cc: e5980000 ldr r0, [r8] 10d0: e3700001 cmn r0, #1 10d4: 12866004 addne r6, r6, #4 10d8: 1affffb6 bne 0xfb8 10dc: e1570006 cmp r7, r6
10e0: 93a00206 movls r0, #1610612736 @ 0x60000000 10e4: 912fff30 blxls r0
// Branch to U-boot SPL
10e8: e28bb001 add fp, fp, #1 10ec: e59a0010 ldr r0, [sl, #16] 10f0: e150000b cmp r0, fp 10f4: 92855001 addls r5, r5, #1 10f8: 9affff35 bls 0xdd4 10fc: eaffff88 b 0xf24
// End off read loop // In case of BOOT_BROM_DOWNLOAD return to 0x1100 instead of 0x1058 to prevent further testing.
1100: e8bd8ffe pop {r1, r2, r3, r4, r5, r6, r7, r8, r9, sl, fp, pc}
On 9/11/23 17:37, Johan Jonker wrote:
When a Rockchip rk3066 board download key is pressed it hangs. The rk3066 BROM doesn't have support to check the return to BROM, so when a key is pressed the loop that reads data must be broken by writing a "-1" to the variable that points to the next page address. It then goes in download mode and waits for data on USB OTG and UART0.
Signed-off-by: Johan Jonker jbx6244@gmail.com
arch/arm/include/asm/arch-rockchip/boot0.h | 32 +++++++++++++++++++--- 1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h index 0c375e543a5e..305461ce3751 100644 --- a/arch/arm/include/asm/arch-rockchip/boot0.h +++ b/arch/arm/include/asm/arch-rockchip/boot0.h @@ -3,6 +3,8 @@
- Copyright 2017 Theobroma Systems Design und Consulting GmbH
*/
+#include <asm/arch-rockchip/boot_mode.h>
/*
- Execution starts on the instruction following this 4-byte header
- (containing the magic 'RK30', 'RK31', 'RK32' or 'RK33'). This
@@ -23,17 +25,39 @@ * the first one may be overwritten, if this is the first stage * contained in the final image created with mkimage)... */
- b 1f /* if overwritten, entry-address is at the next word */
- b 1f /* if overwritten, entry-address is at the next word */
1: #endif #if CONFIG_IS_ENABLED(ROCKCHIP_EARLYRETURN_TO_BROM)
- adr r3, entry_counter
+#if IS_ENABLED(CONFIG_ROCKCHIP_RK3066) +/*
- Unlike newer Rockchip SoC models the rk3066 BROM code does not have
- built-in support to enter download mode after return to BROM code.
- Before a return the boot mode register must be checked for the
- BOOT_BROM_DOWNLOAD flag. Writing '-1' to a location in SRAM
- where the BROM stores the next page address breaks the loop
- that reads boot blocks. The boot ROM code then goes into a
- download mode and waits for data on USB OTG and UART0.
- */
- ldr r1, =BOOT_BROM_DOWNLOAD
- ldr r0, =CONFIG_ROCKCHIP_BOOT_MODE_REG
- ldr r0, [r0]
- cmp r0, r1 /* if (readl(CONFIG_ROCKCHIP_BOOT_MODE_REG) == */
- bne counter_check /* BOOT_BROM_DOWNLOAD) { */
- ldr r1, =0xffffffff
- ldr r0, =0x10080028
- str r1, [r0] /* writel(0xffffffff, 0x10080028); */
- mov r0, #1 /* return 1; */
- bx lr /* } */
+counter_check: +#endif
- adr r3, entry_counter ldr r0, [r3] cmp r0, #1 /* check if entry_counter == 1 */ beq reset /* regular bootup */
- add r0, #1
- add r0, #1 str r0, [r3] /* increment the entry_counter in memory */
- mov r0, #0 /* return 0 to the BROM to signal 'OK' */
- mov r0, #0 /* return 0 to the BROM to signal 'OK' */ bx lr /* return control to the BROM */
entry_counter: .word 0 -- 2.39.2