From: Igor Opaniuk igor.opaniuk@toradex.com
Currently Colibri iMX7 NAND version doesn't boot at all with HABv4 support enabled. If CSF section is included in the final imx binary, BootROM every time switches to usb recovery mode. However eMMC version of the same SoM works without any issues.
Disable HAB and CAAM support for now until the problem is properly investigated and fixed.
For additional details about the problem check [2], [3], [4].
[1] https://www.nxp.com/docs/en/application-note/AN4581.pdf [2] https://lists.denx.de/pipermail/u-boot/2019-July/379103.html [3] https://lists.denx.de/pipermail/u-boot/2019-September/383412.html [4] https://community.nxp.com/message/1138659
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
configs/colibri_imx7_defconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 29ddd7d3e9..7a4caca977 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -8,8 +8,6 @@ CONFIG_ENV_OFFSET=0x380000 CONFIG_NR_DRAM_BANKS=1 CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y -CONFIG_IMX_HAB=y -# CONFIG_CMD_DEKBLOB is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D" CONFIG_BOOTDELAY=1 @@ -39,7 +37,6 @@ CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_BOOTP_PXE is not set CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y -# CONFIG_CMD_HASH is not set CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx7-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)" @@ -52,7 +49,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 -CONFIG_FSL_CAAM=y CONFIG_DFU_NAND=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y @@ -84,5 +80,6 @@ CONFIG_DM_VIDEO=y CONFIG_VIDEO_BPP8=y CONFIG_VIDEO_BPP16=y CONFIG_VIDEO_BPP32=y +CONFIG_SHA_HW_ACCEL=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_FDT_FIXUP_PARTITIONS=y