On Wed, Oct 22, 2014 at 05:47:58PM +0300, Khoronzhuk, Ivan wrote:
From: Vitaly Andrianov vitalya@ti.com
This patch adds the DDR3 ECC support to enable ECC in the DDR3 EMIF controller for Keystone II devices.
By default, ECC will only be enabled if RMW is supported in the DDR EMIF controller. The entire DDR memory will be scrubbed to zero using an EDMA channel after ECC is enabled and before u-boot is re-located to DDR memory.
An ecc_test environment variable is added for ECC testing. If ecc_test is set to 0, a detection of 2-bit error will reset the device, if ecc_test is set to 1, 2-bit error detection will not reset the device, user can still boot the kernel to check the ECC error handling in kernel.
Signed-off-by: Hao Zhang hzhang@ti.com Signed-off-by: Vitaly Andrianov vitalya@ti.com Signed-off-by: Ivan Khoronzhuk ivan.khoronzhuk@ti.com
Applied to u-boot-ti/master, thanks!