Hi Simon
On Fri, Jul 28, 2017 at 1:27 PM, Jaehoon Chung jh80.chung@samsung.com wrote:
Dear Simon,
On 07/05/2017 04:31 AM, Simon Glass wrote:
At present SCSI support for driver model works only with PCI controllers.
This series makes the following changes:
- Adjusts SATA/AHCI support to work with non-PCI controllers
- Allows driver model to be used for MMC in U-Boot proper without
requiring it to be used in SPL
- Adjusts sunxi MMC and SATA drivers to support driver model
- Enables this on a single board (Linksprite_pcDuino3)
Even with this series the AHCI uclass still does not have any operations. This will be needed for drivers which do not use SCSI. Further work is needed to complete this.
Changes in v2:
- Drop debugging printf() now that the card detect is working
- Add new patch to correct polarity of MMC card detect on Linksprite_pcDuino3
Applied to u-boot-mmc. Thanks!
Best Regards, Jaehoon Chung
Simon Glass (15): ahci: Support non-PCI controllers dm: mmc: Allow disabling driver model in SPL fdt: Correct fdt_get_base_address() dm: scsi: Drop duplicate SCSI and DM_SCSI options dm: ahci: Correct uclass private data dm: mmc: sunxi: Rename struct sunxi_mmc_host to sunxi_mmc_priv dm: mmc: sunxi: Rename mmchost to priv dm: mmc: sunxi: Pass private data around explicitly dm: mmc: sunxi: Drop mmc_clk_io_on() dm: mmc: sunxi: Add support for driver model dm: sunxi: Linksprite_pcDuino3: Correct polarity of MMC card detect dm: scsi: Don't scan the SCSI bus when probing dm: sunxi: sata: Don't build sata support into SPL dm: sata: sunxi: Add support for driver model dm: sunxi: Move Linksprite_pcDuino3 to use DM for MMC, SATA
So I was playing around with this for the Pine64 based on your pcDuino3 example patch and it doesn't find the MMC controller, is there other DM conversions that might be needed for some of the sunxi devices?
Peter