Hi
noticed that i need to change the label of wps button back to "wps" when enabling the factory button (else there will be 2 buttons with same label).
Gesendet: Freitag, 07. April 2023 um 23:26 Uhr Von: "Frank Wunderlich" linux@fw-web.de Betreff: [v1 1/2] board: mediatek: add Bananapi-R3 devicetree
From: Daniel Golle daniel@makrotopia.org
Add board specific devicetree for Bananapi R3 SBC.
Signed-off-by: Daniel Golle daniel@makrotopia.org Signed-off-by: Frank Wunderlich frank-w@public-files.de
taken from openwrt https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=package/boot/uboot-m... only enabled the factory button which was disabled because a HW-bug in rev 1.0 of r3.
diff --git a/arch/arm/dts/mt7986a-bpi-r3-sd.dts b/arch/arm/dts/mt7986a-bpi-r3-sd.dts new file mode 100644 index 000000000000..82a3975c7de8 --- /dev/null +++ b/arch/arm/dts/mt7986a-bpi-r3-sd.dts
- keys {
compatible = "gpio-keys";factory {label = "reset";gpios = <&gpio 9 GPIO_ACTIVE_LOW>;};wps {label = "reset";
label was changed in openwrt to use this button for reset, but hw bug fixed in newer v1.1 versions of the board. I will change this to "wps" like in linux in next version.
just tell me if the structure is right or if there any other things need to be changed.
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;};- };
regards Frank