When booting in eMMC fast boot, MMC host does not exit from boot mode after bootrom loading image. So the first command 'CMD0' sent in uboot will pull down the CMD line to low and cause errors.
This patch cleans the MMC boot register in "mmc_init" to put the MMC host back to normal mode.
Also clear DLL_CTRL delay line settings at USDHC initialization to eliminate the pre-settings from boot rom.
Signed-off-by: Peng Fan van.freenix@gmail.com Cc: Pantelis Antoniou panto@antoniou-consulting.com Cc: York Sun york.sun@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com ---
V2: Rebased to lastest u-boot master
drivers/mmc/fsl_esdhc.c | 38 +++++++++++++++++++++++++++++--------- include/fsl_esdhc.h | 6 ++++++ 2 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 57ad975..9cd582f 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -56,21 +56,27 @@ struct fsl_esdhc { uint fevt; /* Force event register */ uint admaes; /* ADMA error status register */ uint adsaddr; /* ADMA system address register */ - char reserved2[100]; /* reserved */ - uint vendorspec; /* Vendor Specific register */ - char reserved3[56]; /* reserved */ + char reserved2[4]; + uint dllctrl; + uint dllstat; + uint clktunectrlstatus; + char reserved3[84]; + uint vendorspec; + uint mmcboot; + uint vendorspec2; + char reserved4[48]; uint hostver; /* Host controller version register */ - char reserved4[4]; /* reserved */ - uint dmaerraddr; /* DMA error address register */ char reserved5[4]; /* reserved */ - uint dmaerrattr; /* DMA error attribute register */ + uint dmaerraddr; /* DMA error address register */ char reserved6[4]; /* reserved */ + uint dmaerrattr; /* DMA error attribute register */ + char reserved7[4]; /* reserved */ uint hostcapblt2; /* Host controller capabilities register 2 */ - char reserved7[8]; /* reserved */ + char reserved8[8]; /* reserved */ uint tcr; /* Tuning control register */ - char reserved8[28]; /* reserved */ + char reserved9[28]; /* reserved */ uint sddirctl; /* SD direction control register */ - char reserved9[712]; /* reserved */ + char reserved10[712];/* reserved */ uint scr; /* eSDHC control register */ };
@@ -616,6 +622,20 @@ static int esdhc_init(struct mmc *mmc) while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) udelay(1000);
+#if defined(CONFIG_FSL_USDHC) + /* RSTA doesn't reset MMC_BOOT register, so manually reset it */ + esdhc_write32(®s->mmcboot, 0x0); + /* Reset MIX_CTRL and CLK_TUNE_CTRL_STATUS regs to 0 */ + esdhc_write32(®s->mixctrl, 0x0); + esdhc_write32(®s->clktunectrlstatus, 0x0); + + /* Put VEND_SPEC to default value */ + esdhc_write32(®s->vendorspec, VENDORSPEC_INIT); + + /* Disable DLL_CTRL delay line */ + esdhc_write32(®s->dllctrl, 0x0); +#endif + #ifndef ARCH_MXC /* Enable cache snooping */ esdhc_write32(®s->scr, 0x00000040); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index fa760a5..78c67c8 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -35,6 +35,12 @@ #define SYSCTL_RSTC 0x02000000 #define SYSCTL_RSTD 0x04000000
+#define VENDORSPEC_CKEN 0x00004000 +#define VENDORSPEC_PEREN 0x00002000 +#define VENDORSPEC_HCKEN 0x00001000 +#define VENDORSPEC_IPGEN 0x00000800 +#define VENDORSPEC_INIT 0x20007809 + #define IRQSTAT 0x0002e030 #define IRQSTAT_DMAE (0x10000000) #define IRQSTAT_AC12E (0x01000000)