This board has not been converted to DM_SERIAL by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/Kconfig | 5 -- board/h2200/Kconfig | 9 --- board/h2200/MAINTAINERS | 6 -- board/h2200/Makefile | 14 ---- board/h2200/h2200-header.S | 15 ----- board/h2200/h2200.c | 73 -------------------- configs/h2200_defconfig | 25 ------- include/configs/h2200.h | 155 ------------------------------------------- scripts/config_whitelist.txt | 1 - 9 files changed, 303 deletions(-) delete mode 100644 board/h2200/Kconfig delete mode 100644 board/h2200/MAINTAINERS delete mode 100644 board/h2200/Makefile delete mode 100644 board/h2200/h2200-header.S delete mode 100644 board/h2200/h2200.c delete mode 100644 configs/h2200_defconfig delete mode 100644 include/configs/h2200.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 59c7bcc..26c8e2f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -805,10 +805,6 @@ config TARGET_LS1046ARDB development platform that supports the QorIQ LS1046A Layerscape Architecture processor.
-config TARGET_H2200 - bool "Support h2200" - select CPU_PXA - config TARGET_ZIPITZ2 bool "Support zipitz2" select CPU_PXA @@ -978,7 +974,6 @@ source "board/freescale/mx53smd/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/freescale/vf610twr/Kconfig" source "board/gumstix/pepper/Kconfig" -source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" diff --git a/board/h2200/Kconfig b/board/h2200/Kconfig deleted file mode 100644 index c0e0c1e..0000000 --- a/board/h2200/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_H2200 - -config SYS_BOARD - default "h2200" - -config SYS_CONFIG_NAME - default "h2200" - -endif diff --git a/board/h2200/MAINTAINERS b/board/h2200/MAINTAINERS deleted file mode 100644 index b66ff51..0000000 --- a/board/h2200/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -H2200 BOARD -M: Lukasz Dalek luk0104@gmail.com -S: Maintained -F: board/h2200/ -F: include/configs/h2200.h -F: configs/h2200_defconfig diff --git a/board/h2200/Makefile b/board/h2200/Makefile deleted file mode 100644 index e516e91..0000000 --- a/board/h2200/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# h2200 Support -# -# Copyright (C) 2012 Lukasz Dalek luk0104@gmail.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := h2200.o - -extra-y := h2200-header.bin - -$(obj)/h2200-header.bin: $(obj)/h2200-header.o - $(OBJCOPY) -O binary $< $@ diff --git a/board/h2200/h2200-header.S b/board/h2200/h2200-header.S deleted file mode 100644 index ac2e6b4..0000000 --- a/board/h2200/h2200-header.S +++ /dev/null @@ -1,15 +0,0 @@ -/* - * iPAQ h2200 header - * - * Copyright (C) 2012 Lukasz Dalek luk0104@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - .word 0xea0003fe /* b 0x1000 */ - - .org 0x40 - .ascii "ECEC" - - .org 0x1000 - 1 - .byte 0x0 diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c deleted file mode 100644 index 01f8e67..0000000 --- a/board/h2200/h2200.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * iPAQ h2200 board configuration - * - * Copyright (C) 2012 Lukasz Dalek luk0104@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/pxa.h> -#include <asm/arch/pxa-regs.h> -#include <asm/io.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_eth_init(bd_t *bis) -{ - usb_eth_initialize(bis); - return 0; -} - -void reset_cpu(ulong ignore) -{ - /* Enable VLIO interface on Hamcop */ - writeb(0x1, 0x4000); - - /* Reset board (cold reset) */ - writeb(0xff, 0x4002); -} - -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - gd->bd->bi_arch_number = MACH_TYPE_H2200; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Let host see that device is disconnected */ - udc_disconnect(); - mdelay(500); - - return 0; -} - -int dram_init(void) -{ - /* - * Everything except MSC0 was already set up by - * 1st stage bootloader. - * - * This setting enables access to companion chip. - */ - clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL); - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_USB_GADGET_PXA2XX -int board_usb_init(int index, enum usb_init_type init) -{ - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif diff --git a/configs/h2200_defconfig b/configs/h2200_defconfig deleted file mode 100644 index ed2217a..0000000 --- a/configs/h2200_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_H2200=y -CONFIG_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="> " -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_SAVEENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_MEMORY is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set diff --git a/include/configs/h2200.h b/include/configs/h2200.h deleted file mode 100644 index 3e419c6..0000000 --- a/include/configs/h2200.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * iPAQ h2200 board configuration - * - * Copyright (C) 2012 Lukasz Dalek luk0104@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define MACH_TYPE_H2200 341 -#define CONFIG_MACH_TYPE MACH_TYPE_H2200 - -#define CONFIG_CPU_PXA25X 1 -#define CONFIG_BOARD_H2200 - -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE - -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -#define CONFIG_ENV_SIZE 0x00040000 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ - -/* - * iPAQ 1st stage bootloader loads 2nd stage bootloader - * at address 0xa0040000 but bootloader requires header - * which is 0x1000 long. - * - * --- Header begin --- - * .word 0xea0003fe ; b 0x1000 - * - * .org 0x40 - * .ascii "ECEC" - * - * .org 0x1000 - * --- Header end --- - */ - -#define CONFIG_SYS_TEXT_BASE 0xa0041000 - -/* - * Static chips - */ - -#define CONFIG_SYS_MSC0_VAL 0x246c7ffc -#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 -#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 - -/* - * PCMCIA and CF Interfaces - */ - -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00040004 - -#define CONFIG_SYS_MDREFR_VAL 0x0099E018 -#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB -#define CONFIG_SYS_MDMRS_VAL 0x00220022 - -#define CONFIG_SYS_PSSR_VAL 0x00000000 -#define CONFIG_SYS_CKEN 0x00004840 -#define CONFIG_SYS_CCCR 0x00000161 - -/* - * GPIOs - */ - -#define CONFIG_SYS_GPSR0_VAL 0x01000000 -#define CONFIG_SYS_GPSR1_VAL 0x00000000 -#define CONFIG_SYS_GPSR2_VAL 0x00010000 - -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 - -#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 -#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 -#define CONFIG_SYS_GPDR2_VAL 0x000157FF - -#define CONFIG_SYS_GAFR0_L_VAL 0x80401000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00000112 -#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 -#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0x20000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 - -/* - * Serial port - */ - -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART -#define CONFIG_CONS_INDEX 3 - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } - -#define CONFIG_FIT_DISABLE_SHA256 -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -/* Monitor Command Prompt */ - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_USB_DEV_PULLUP_GPIO 33 -/* USB VBUS GPIO 3 */ - -#define CONFIG_BOOTCOMMAND \ - "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ - "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ - "source :script ; " \ - "bootm ; " - -#define CONFIG_USB_GADGET_PXA2XX -#define CONFIG_USB_ETHER -#define CONFIG_USB_ETH_SUBSET - -#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" -#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -#endif /* __CONFIG_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 04e9536..2c10c0b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -373,7 +373,6 @@ CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_EARLY_INIT_R CONFIG_BOARD_ECC_SUPPORT CONFIG_BOARD_EMAC_COUNT -CONFIG_BOARD_H2200 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE