Hi Przemyslaw,
On 23 April 2015 at 06:31, Przemyslaw Marczak p.marczak@samsung.com wrote:
Hello Simon,
On 04/20/2015 08:07 PM, Przemyslaw Marczak wrote:
This driver implements regulator operations for fixed Voltage/Current value regulators. beside the standard regulator constraints, which are put into the uclass platform data, a typical fixed regulator node provides few additional properties like:
- gpio
- gpio-open-drain
- enable-active-high
- startup-delay-us
The only 'gpio' is used by this driver and is kept in structure of type 'fixed_regulator_platdata', as a device platform data (dev->platdata).
The driver implements:
- get_value
- get_current
- get_enable
- set_enable
The regulator calls and commands can be used for fixed-regulator devices, and the proper error will be returned for prohibited.
Signed-off-by: Przemyslaw Marczak p.marczak@samsung.com
I missed the separation (---) here and I see that you add ACK below the changes. Could you remove them from the tree?
OK, done. You could try patman which handles this automatically.
Regards, Simon