On 13/08/2012 22:48, Benoît Thébaudeau wrote:
This patches fixes the TODO to use same register definitions in mtd mxc_nand and nand_spl fsl nfc drivers.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Scott Wood scottwood@freescale.com Cc: Stefano Babic sbabic@denx.de
Hi Benoît,
before going deeper in the review there is a general issue.
nand_spl was used in the past and it was the first implementation to have a first loader able to copy u-boot into RAM when the SOC boots from NAND. It is replaced by the general SPL framework. All new implementations must use the new SPL framework, What you see under nand_spl is referred to already supported boards.
With general SPL, we do not have two drivers for NAND, and we are able to boot from other devices, too. So it makes no sense to try to uniform the driver under nand_spl with the main driver, we want to use only the main driver.
Best regards, Stefano Babic