This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
Signed-off-by: Tom Rini trini@konsulko.com --- README | 6 -- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 + .../include/asm/arch-fsl-layerscape/config.h | 2 - arch/powerpc/cpu/mpc85xx/Kconfig | 70 +++++++++++++++++++ arch/powerpc/cpu/mpc85xx/cpu.c | 3 - arch/powerpc/cpu/mpc85xx/spl_minimal.c | 4 -- arch/powerpc/include/asm/config_mpc85xx.h | 42 ----------- drivers/net/Kconfig | 4 ++ drivers/usb/host/Kconfig | 6 ++ include/configs/P3041DS.h | 2 - include/configs/P4080DS.h | 1 - include/configs/P5040DS.h | 3 - 12 files changed, 82 insertions(+), 63 deletions(-)
diff --git a/README b/README index 4ef9e8c3ac7e..a6c306149c73 100644 --- a/README +++ b/README @@ -294,12 +294,6 @@ The following options need to be configured: the "64" category of the Power ISA). This is necessary for ePAPR compliance, among other possible reasons.
- CONFIG_SYS_FSL_TBCLK_DIV - - Defines the core time base clock divider ratio compared to the - system clock. On most PQ3 devices this is 8, on newer QorIQ - devices it can be 16 or 32. The ratio varies from SoC to Soc. - CONFIG_SYS_FSL_ERRATUM_A004510
Enables a workaround for erratum A004510. If set, diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 91a5863c97fb..8a7bbb4a6559 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -85,6 +85,7 @@ config ARCH_LS1043A select SYS_FSL_ERRATUM_A010539 select SYS_FSL_HAS_DDR3 select SYS_FSL_HAS_DDR4 + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F select SYS_I2C_MXC @@ -123,6 +124,7 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A010539 select SYS_FSL_HAS_DDR4 select SYS_FSL_SRDS_2 + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F select SYS_I2C_MXC diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 1850008a6d16..5824778ca286 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -209,7 +209,6 @@
/* SoC related */ #ifdef CONFIG_ARCH_LS1043A -#define CONFIG_SYS_FSL_QMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 7 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -256,7 +255,6 @@ #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
#elif defined(CONFIG_ARCH_LS1046A) -#define CONFIG_SYS_FSL_QMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 8 #define CONFIG_SYS_NUM_FM1_10GEC 2 diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 796a5477b0e6..65db15085712 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -25,6 +25,7 @@ config TARGET_P3041DS select PHYS_64BIT select ARCH_P3041 select BOARD_LATE_INIT if CHAIN_OF_TRUST + select FSL_NGPIXIS imply CMD_SATA imply PANIC_HANG
@@ -33,6 +34,7 @@ config TARGET_P4080DS select PHYS_64BIT select ARCH_P4080 select BOARD_LATE_INIT if CHAIN_OF_TRUST + select FSL_NGPIXIS imply CMD_SATA imply PANIC_HANG
@@ -41,6 +43,8 @@ config TARGET_P5040DS select PHYS_64BIT select ARCH_P5040 select BOARD_LATE_INIT if CHAIN_OF_TRUST + select FSL_NGPIXIS + select SYS_FSL_RAID_ENGINE imply CMD_SATA imply PANIC_HANG
@@ -209,6 +213,8 @@ config ARCH_B4420 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB1_PHY_ENABLE select SYS_PPC64 select FSL_IFC imply CMD_EEPROM @@ -240,6 +246,9 @@ config ARCH_B4860 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SRIO_LIODN + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB1_PHY_ENABLE select SYS_PPC64 select FSL_IFC imply CMD_EEPROM @@ -352,6 +361,7 @@ config ARCH_MPC8548 select SYS_FSL_HAS_DDR2 select SYS_FSL_HAS_DDR1 select SYS_FSL_HAS_SEC + select SYS_FSL_RMU select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_2 select SYS_PPC_E500_USE_DEBUG_TLB @@ -387,6 +397,7 @@ config ARCH_P1010 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_USB1_PHY_ENABLE select SYS_PPC_E500_USE_DEBUG_TLB select FSL_IFC imply CMD_EEPROM @@ -524,6 +535,7 @@ config ARCH_P2020 select FSL_PCIE_RESET select SYS_FSL_HAS_DDR3 select SYS_FSL_HAS_SEC + select SYS_FSL_RMU select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_2 select SYS_PPC_E500_USE_DEBUG_TLB @@ -557,6 +569,8 @@ config ARCH_P2041 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_USB1_PHY_ENABLE + select SYS_FSL_USB2_PHY_ENABLE select FSL_ELBC imply CMD_NAND
@@ -587,6 +601,8 @@ config ARCH_P3041 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_USB1_PHY_ENABLE + select SYS_FSL_USB2_PHY_ENABLE select FSL_ELBC imply CMD_NAND imply CMD_SATA @@ -628,6 +644,7 @@ config ARCH_P4080 select SYS_FSL_HAS_DDR3 select SYS_FSL_HAS_SEC select SYS_FSL_QORIQ_CHASSIS1 + select SYS_FSL_RMU select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 select FSL_ELBC @@ -658,6 +675,8 @@ config ARCH_P5040 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_USB1_PHY_ENABLE + select SYS_FSL_USB2_PHY_ENABLE select SYS_PPC64 select FSL_ELBC imply CMD_SATA @@ -689,6 +708,9 @@ config ARCH_T1024 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SINGLE_SOURCE_CLK + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB_DUAL_PHY_ENABLE select FSL_IFC imply CMD_EEPROM imply CMD_NAND @@ -717,6 +739,9 @@ config ARCH_T1040 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SINGLE_SOURCE_CLK + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB_DUAL_PHY_ENABLE select FSL_IFC imply CMD_MTDPARTS imply CMD_NAND @@ -744,6 +769,9 @@ config ARCH_T1042 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SINGLE_SOURCE_CLK + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB_DUAL_PHY_ENABLE select FSL_IFC imply CMD_MTDPARTS imply CMD_NAND @@ -773,6 +801,9 @@ config ARCH_T2080 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v30 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SRIO_LIODN + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB_DUAL_PHY_ENABLE select SYS_PPC64 select FSL_IFC imply CMD_SATA @@ -806,6 +837,9 @@ config ARCH_T4240 select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v30 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SRIO_LIODN + select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN + select SYS_FSL_USB_DUAL_PHY_ENABLE select SYS_PPC64 select FSL_IFC imply CMD_SATA @@ -1094,6 +1128,12 @@ config FSL_PCIE_DISABLE_ASPM config FSL_PCIE_RESET bool
+config SYS_FSL_RAID_ENGINE + bool + +config SYS_FSL_RMU + bool + config SYS_FSL_QORIQ_CHASSIS1 bool
@@ -1259,6 +1299,9 @@ config FSL_CORENET bool select SYS_FSL_CPC
+config FSL_NGPIXIS + bool + config SYS_CPC_REINIT_F bool help @@ -1294,6 +1337,33 @@ config SYS_FSL_PCIE_COMPAT Defines the string to utilize when trying to match PCIe device tree nodes for the given platform.
+config SYS_FSL_SINGLE_SOURCE_CLK + bool + +config SYS_FSL_SRIO_LIODN + bool + +config SYS_FSL_TBCLK_DIV + int + default 32 if ARCH_P2041 || ARCH_P3041 + default 16 if ARCH_P4080 || ARCH_P5040 || ARCH_T4240 || ARCH_B4860 || \ + ARCH_B4420 || ARCH_T1040 || ARCH_T1042 || \ + ARCH_T1024 || ARCH_T2080 + default 8 + help + Defines the core time base clock divider ratio compared to the system + clock. On most PQ3 devices this is 8, on newer QorIQ devices it can + be 16 or 32. The ratio varies from SoC to Soc. + +config SYS_FSL_USB1_PHY_ENABLE + bool + +config SYS_FSL_USB2_PHY_ENABLE + bool + +config SYS_FSL_USB_DUAL_PHY_ENABLE + bool + config SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up" depends on MPC85xx diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index ba9736ebef45..a44bf2171a9d 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -333,9 +333,6 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) /* * Get timebase clock frequency */ -#ifndef CONFIG_SYS_FSL_TBCLK_DIV -#define CONFIG_SYS_FSL_TBCLK_DIV 8 -#endif __weak unsigned long get_tbclk(void) { unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV; diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index 21b35db08df1..bdd73389d902 100644 --- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -31,10 +31,6 @@ ulong cpu_init_f(void) return 0; }
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV -#define CONFIG_SYS_FSL_TBCLK_DIV 8 -#endif - void udelay(unsigned long usec) { u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000); diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index f972bee74708..d3d4e9c053f4 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -20,15 +20,12 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_ARCH_P1010) #define CONFIG_FSL_SDHC_V2_3 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
/* P1011 is single core version of P1020 */ #elif defined(CONFIG_ARCH_P1011) @@ -65,7 +62,6 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_ARCH_P2041) /* also supports P2040 */ @@ -73,10 +69,6 @@ #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 32 -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -87,10 +79,6 @@ #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 32 -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -103,11 +91,9 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_NUM_FM2_10GEC 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
@@ -118,10 +104,6 @@ #define CONFIG_SYS_NUM_FM2_DTSEC 5 #define CONFIG_SYS_NUM_FM2_10GEC 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 16 -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#elif defined(CONFIG_ARCH_BSC9131) @@ -135,7 +117,6 @@ #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
#elif defined(CONFIG_ARCH_T4240) -#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #ifdef CONFIG_ARCH_T4240 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4 } #define CONFIG_SYS_NUM_FM1_DTSEC 8 @@ -158,24 +139,17 @@ #define CONFIG_SYS_FM1_CLK 3 #define CONFIG_SYS_FM2_CLK 3 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 -#define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_SRIO_LIODN -#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) -#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_SRDS_1 #define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FM1_CLK 0 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 -#define CONFIG_SYS_FSL_TBCLK_DIV 16 -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#ifdef CONFIG_ARCH_B4860 #define CONFIG_MAX_DSP_CPUS 12 @@ -186,7 +160,6 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_SRIO_LIODN #else #define CONFIG_MAX_DSP_CPUS 2 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4 } @@ -195,7 +168,6 @@ #endif
#elif defined(CONFIG_ARCH_T1040) || defined(CONFIG_ARCH_T1042) -#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 } #define CONFIG_SYS_FSL_SRDS_1 #define CONFIG_SYS_NUM_FMAN 1 @@ -206,17 +178,12 @@ #define CONFIG_FM_PLAT_CLK_DIV 1 #define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV #define CONFIG_SYS_FM_MURAM_SIZE 0x30000 -#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK -#define CONFIG_SYS_FSL_TBCLK_DIV 16 -#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_ARCH_T1024) -#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_NUM_CC_PLL 2 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 } #define CONFIG_SYS_FSL_SRDS_1 @@ -228,17 +195,12 @@ #define CONFIG_SYS_FM1_CLK 0 #define CONFIG_QBMAN_CLK_DIV 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x30000 -#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK -#define CONFIG_SYS_FSL_TBCLK_DIV 16 -#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_ARCH_T2080) -#define CONFIG_SYS_FSL_QMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } #define CONFIG_SYS_FSL_SRDS_1 @@ -246,7 +208,6 @@ #define CONFIG_SYS_NUM_FM1_DTSEC 8 #define CONFIG_SYS_NUM_FM1_10GEC 4 #define CONFIG_SYS_FSL_SRDS_2 -#define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -256,9 +217,6 @@ #define CONFIG_SYS_FM1_CLK 0 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 16 -#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 93e7dbe97661..73db3ca70216 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -838,6 +838,10 @@ config SYS_DPAA_QBMAN help QBman fixups to allow deep sleep in DPAA 1 SOCs
+config SYS_FSL_QMAN_V3 + bool # QMAN version 3 + depends on SYS_DPAA_QBMAN + config TSEC_ENET select PHYLIB bool "Enable Three-Speed Ethernet Controller" diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c3b97f48f0f2..a0f48f09a7f3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -282,9 +282,15 @@ config EHCI_HCD_INIT_AFTER_RESET config USB_EHCI_FSL bool "Support for FSL on-chip EHCI USB controller" select EHCI_HCD_INIT_AFTER_RESET + select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85xx && \ + !(ARCH_B4860 || ARCH_B4420 || ARCH_P4080 || ARCH_P1020 || ARCH_P2020) ---help--- Enables support for the on-chip EHCI controller on FSL chips.
+config SYS_FSL_USB_INTERNAL_UTMI_PHY + bool + depends on USB_EHCI_FSL + config USB_EHCI_TXFIFO_THRESH hex depends on USB_EHCI_TEGRA diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h index bc8aa3ce0549..42e507bac0bb 100644 --- a/include/configs/P3041DS.h +++ b/include/configs/P3041DS.h @@ -7,8 +7,6 @@ * P3041 DS board configuration file * */ -#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ - #define CONFIG_SYS_DPAA_RMAN
#define CONFIG_SYS_SRIO diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index 6375c65d483b..fd558398e4a1 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -7,7 +7,6 @@ * P4080 DS board configuration file * Also supports P4040 DS */ -#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
#define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h index fb73f0b95390..c8fc879d2f88 100644 --- a/include/configs/P5040DS.h +++ b/include/configs/P5040DS.h @@ -7,9 +7,6 @@ * P5040 DS board configuration file * */ -#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ - -#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */