Migrate to DM_ETH and remove code that is no longer necessary.
Signed-off-by: Sébastien Szymanski sebastien.szymanski@armadeus.com --- arch/arm/mach-imx/mx6/opos6ul.c | 76 +++------------------------------ configs/opos6uldev_defconfig | 2 + include/configs/opos6uldev.h | 8 ---- 3 files changed, 8 insertions(+), 78 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c index c5fafb9f8e..50aec5171c 100644 --- a/arch/arm/mach-imx/mx6/opos6ul.c +++ b/arch/arm/mach-imx/mx6/opos6ul.c @@ -6,11 +6,7 @@ #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> #include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> #include <asm/io.h> #include <common.h> #include <env.h> @@ -20,43 +16,6 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_FEC_MXC #include <miiphy.h>
-#define MDIO_PAD_CTRL ( \ - PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm \ -) - -#define ENET_PAD_CTRL_PU ( \ - PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm \ -) - -#define ENET_PAD_CTRL_PD ( \ - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm \ -) - -#define ENET_CLK_PAD_CTRL ( \ - PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST \ -) - -static iomux_v3_cfg_t const fec1_pads[] = { - MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL_PU), - MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL_PU), - MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL_PU), - /* PHY Int */ - MX6_PAD_NAND_DQS__GPIO4_IO16 | MUX_PAD_CTRL(ENET_PAD_CTRL_PU), - /* PHY Reset */ - MX6_PAD_NAND_DATA00__GPIO4_IO02 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), -}; - int board_phy_config(struct phy_device *phydev) { phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190); @@ -67,43 +26,16 @@ int board_phy_config(struct phy_device *phydev) return 0; }
-int board_eth_init(bd_t *bis) +static int setup_fec(void) { struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; - struct gpio_desc rst; - int ret;
/* Use 50M anatop loopback REF_CLK1 for ENET1, * clear gpr1[13], set gpr1[17] */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
- ret = enable_fec_anatop_clock(0, ENET_50MHZ); - if (ret) - return ret; - - enable_enet_clk(1); - - imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); - - ret = dm_gpio_lookup_name("GPIO4_2", &rst); - if (ret) { - printf("Cannot get GPIO4_2\n"); - return ret; - } - - ret = dm_gpio_request(&rst, "phy-rst"); - if (ret) { - printf("Cannot request GPIO4_2\n"); - return ret; - } - - dm_gpio_set_dir_flags(&rst, GPIOD_IS_OUT); - dm_gpio_set_value(&rst, 0); - udelay(1000); - dm_gpio_set_value(&rst, 1); - - return fecmxc_initialize(bis); + return enable_fec_anatop_clock(0, ENET_50MHZ); } #endif /* CONFIG_FEC_MXC */
@@ -112,6 +44,10 @@ int board_init(void) /* Address of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + return 0; }
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index 5eef6527cd..44236e99bc 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -73,6 +73,8 @@ CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ8XXX=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index b13e476027..b10071eaaf 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -41,14 +41,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif
-/* Ethernet */ -#ifdef CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" -#endif - /* LCD */ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_VIDEO