On Thu, 9 Jan 2025 at 10:56, Varadarajan Narayanan quic_varada@quicinc.com wrote:
Introduce a defconfig for the Ride R3 and other QCS9100 boards with a dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Signed-off-by: Varadarajan Narayanan quic_varada@quicinc.com
v2: Use qcs9100-ride-r3 for default DT instead of sa8775p-ride-r3
configs/qcs9100_defconfig | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 configs/qcs9100_defconfig
diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig new file mode 100644 index 00000000000..7e72c64968b --- /dev/null +++ b/configs/qcs9100_defconfig @@ -0,0 +1,24 @@ +# Configuration for building U-Boot to be flashed +# to the uefi partition of QCS9100 based dev boards with +# the "Linux Embedded" partition layout (which have +# a dedicated "uefi" partition for edk2/U-Boot)
+#include "qcom_defconfig"
+# Otherwise buildman thinks this isn't an ARM platform +CONFIG_ARM=y
This is already defined in qcom_defconfig.
+CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0xA8C000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600
+# Address where U-Boot will be loaded +CONFIG_TEXT_BASE=0xaf000000 +CONFIG_REMAKE_ELF=y
+CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3"
+CONFIG_PHY_QCOM_QMP_UFS=y +CONFIG_QCOM_UFS=y
Again, these are already defined in qcom_defconfig.
-Sumit
-- 2.34.1