Re: [U-Boot] [PATCH v7 2/6] Marvell Sheevaplug Board support

On 20:58 Thu 16 Jul , Prafulla Wadaskar wrote:

Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support

This patch is tested for-

1. Boot from DRAM/NAND flash
2. File transfer using tftp
3. NAND flash read/write/erase
4. Linux kernel and RFS Boot from NAND
5. Enabled USB PHY init for kernel need
6. Boot from USB supported

Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence

Signed-off-by: Prafulla Wadaskar prafulla@marvell.com

Applied to u-boot-arm

Best Regards, J.