Hi Patrick
On 2/23/22 08:41, Patrice CHOTARD wrote:
Hi Patrick
On 2/1/22 14:02, Patrick Delaunay wrote:
From: Gabriel Fernandez gabriel.fernandez@foss.st.com
The clk_set_rate() function returns rate as an 'ulong' not an 'int' and rate > 0 by default.
This patch avoids to display the associated warning when the set rate function returns the new frequency.
Fixes: aeaf330649e8 ("video: stm32: stm32_ltdc: add bridge to display controller") Signed-off-by: Gabriel Fernandez gabriel.fernandez@foss.st.com Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com
drivers/video/stm32/stm32_ltdc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c index 87e5fd54d9..e741e74739 100644 --- a/drivers/video/stm32/stm32_ltdc.c +++ b/drivers/video/stm32/stm32_ltdc.c @@ -338,6 +338,7 @@ static int stm32_ltdc_probe(struct udevice *dev) struct display_timing timings; struct clk pclk; struct reset_ctl rst;
ulong rate; int ret;
priv->regs = (void *)dev_read_addr(dev);
@@ -375,13 +376,13 @@ static int stm32_ltdc_probe(struct udevice *dev) } }
- ret = clk_set_rate(&pclk, timings.pixelclock.typ);
- if (ret)
dev_warn(dev, "fail to set pixel clock %d hz\n",timings.pixelclock.typ);
rate = clk_set_rate(&pclk, timings.pixelclock.typ);
if (IS_ERR_VALUE(rate))
dev_warn(dev, "fail to set pixel clock %d hz, ret=%ld\n",timings.pixelclock.typ, rate);dev_dbg(dev, "Set pixel clock req %d hz get %ld hz\n",
timings.pixelclock.typ, clk_get_rate(&pclk));
timings.pixelclock.typ, rate);ret = reset_get_by_index(dev, 0, &rst); if (ret) {
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks Patrice _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied to u-boot-stm32
Thanks Patrice