Kim Phillips schrieb:
On Mon, 08 Dec 2008 18:02:02 +0100 Andre Schwarz andre.schwarz@matrix-vision.de wrote:
I'd like to change my DDR setup code since it looks like my computed values are not perfectly stable on our 8343 based board.
This implies using a fake SPD and the related code to set up the controller.
Is the "new" common FSL DDR setup code (cpu/mpc8xxx/ddr/*) stable for 83xx or shall I stick to cpu/mpc83xx/spd_sdram.c for a while ?
I haven't taken a look at the "new" common ddr code, and there are no current 83xx users that I know of, but if you're willing to port it over to 83xx, it should work better for you than the current 83xx spd code, and give us a basis to work on to move the rest of the 83xx boards over.
Kim
ok - thanks. That's why I'm asking ... no 83xx yet. I'll try the default spd driver with fake EEPROM then.
regards, André
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner