On 11/01/2011 07:16 PM, Fabio Estevam wrote:
Enable D and I caches on mx31pdk.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Stefano,
You explained that enabling cache may cause some drivers like FEC and MMC not to work properly. As mx31pdk does not have FEC or MMC driver I thought this should be OK.
Ok, understood.
Tested by booting Linux kernel via TFTP and mounting a NFS rootfs.
Good. To be sure, do you have also tested NAND in u-boot ? I do not expect problems, but...
board/freescale/mx31pdk/mx31pdk.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index 9f8bc53..1d7b4f6 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -71,11 +71,19 @@ int board_early_init_f(void) return 0; }
+void enable_caches(void) +{
- icache_enable();
- dcache_enable();
+}
int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
- enable_caches();
- return 0;
}
Acked-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic