Re: [U-Boot] [PATCH 2/2] i2c: sandbox: remove code snippet from Kconfig help

Hello Masahiro,

Am 11.02.2017 um 04:39 schrieb Masahiro Yamada:

With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings:

$ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';'

Drop the Device Tree fragment from the help.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com

drivers/i2c/Kconfig | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-)

Thanks!

Acked-by: Heiko Schocher hs@denx.de

bye, Heiko

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 71cc173..39f62da 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -132,28 +132,7 @@ config SYS_I2C_SANDBOX help Enable I2C support for sandbox. This is an emulation of a real I2C bus. Devices can be attached to the bus using the device tree

•  which specifies the driver to use. As an example, see this device
  

•  tree fragment from sandbox.dts. It shows that the I2C bus has a
  

•  single EEPROM at address 0x2c (7-bit address) which is emulated by
  

•  the driver for "sandbox,i2c-eeprom", which is in
  

•  drivers/misc/i2c_eeprom_emul.c.
  

•  i2c@0 {
  

• #address-cells = <1>;
  

• #size-cells = <0>;
  

• reg = <0>;
  

• compatible = "sandbox,i2c";
  

• clock-frequency = <400000>;
  

• eeprom@2c {
  

• 	reg = <0x2c>;
  

• 	compatible = "i2c-eeprom";
  

• 	emul {
  

• 		compatible = "sandbox,i2c-eeprom";
  

• 		sandbox,filename = "i2c.bin";
  

• 		sandbox,size = <128>;
  

• 	};
  

• };
  

• };

•  which specifies the driver to use.  See sandbox.dts as an example.
  
  

  config SYS_I2C_S3C24X0 bool "Samsung I2C driver"