Add documentation on the usage of "mmc dev" and "mmc rescan" commands to set user defined speed modes.
Signed-off-by: Aswath Govindraju a-govindraju@ti.com --- doc/usage/mmc.rst | 49 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 47 insertions(+), 2 deletions(-)
diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst index f20efe3d7063..d15b151884fd 100644 --- a/doc/usage/mmc.rst +++ b/doc/usage/mmc.rst @@ -12,9 +12,9 @@ Synopsis mmc read addr blk# cnt mmc write addr blk# cnt mmc erase blk# cnt - mmc rescan + mmc rescan [mode] mmc part - mmc dev [dev] [part] + mmc dev [dev] [part] [mode] mmc list mmc wp mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode> @@ -49,6 +49,27 @@ The 'mmc erase' command erases *cnt* blocks on the MMC device starting at block
The 'mmc rescan' command scans the available MMC device.
+ mode + speed mode to set. + CONFIG_MMC_SPEED_MODE_SET should be enabled. The required speed mode is + passed as the index from the following list. + + 0 - MMC_LEGACY + 1 - MMC_HS + 2 - SD_HS + 3 - MMC_HS_52 + 4 - MMC_DDR_52 + 5 - UHS_SDR12 + 6 - UHS_SDR25 + 7 - UHS_SDR50 + 8 - UHS_DDR50 + 9 - UHS_SDR104 + 10 - MMC_HS_200 + 11 - MMC_HS_400 + 12 - MMC_HS_400_ES + + A speed mode can be set only if it has already been enabled in the device tree + The 'mmc part' command displays the list available partition on current mmc device.
The 'mmc dev' command shows or set current mmc device. @@ -58,6 +79,27 @@ The 'mmc dev' command shows or set current mmc device. part partition number to change
+ mode + speed mode to set. + CONFIG_MMC_SPEED_MODE_SET should be enabled. The required speed mode is + passed as the index from the following list. + + 0 - MMC_LEGACY + 1 - MMC_HS + 2 - SD_HS + 3 - MMC_HS_52 + 4 - MMC_DDR_52 + 5 - UHS_SDR12 + 6 - UHS_SDR25 + 7 - UHS_SDR50 + 8 - UHS_DDR50 + 9 - UHS_SDR104 + 10 - MMC_HS_200 + 11 - MMC_HS_400 + 12 - MMC_HS_400_ES + + A speed mode can be set only if it has already been enabled in the device tree + The 'mmc list' command displays the list available devices.
The 'mmc wp' command enables "power on write protect" function for boot partitions. @@ -194,6 +236,9 @@ The current device can be shown or set via 'mmc dev' command: => mmc dev 2 0 switch to partitions #0, OK mmc2 is current device + => mmc dev 0 1 4 + switch to partitions #1, OK + mmc0(part 1) is current device
The list of available devices can be shown via 'mmc list' command: ::