On Wed, Dec 04, 2019 at 10:36:47AM +0000, Peng Ma wrote:
If we didn't unbind the sata from block device, the same devices would be added after sata remove, This patch is to resolve this issue as below:
=> sata info SATA#0: (3.0 Gbps) SATA#1: (3.0 Gbps) Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY30 Type: Hard Disk Supports 48-bit addressing Capacity: 286168.1 MB = 279.4 GB (586072368 x 512) Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX30 Type: Hard Disk Supports 48-bit addressing Capacity: 286168.1 MB = 279.4 GB (586072368 x 512) => sata stop => sata info SATA#0: (3.0 Gbps) SATA#1: (3.0 Gbps) Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300 Type: Hard Disk Supports 48-bit addressing Capacity: 286168.1 MB = 279.4 GB (586072368 x 512) Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300 Type: Hard Disk Supports 48-bit addressing Capacity: 286168.1 MB = 279.4 GB (586072368 x 512) Device 2: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300 Type: Hard Disk Supports 48-bit addressing Capacity: 286168.1 MB = 279.4 GB (586072368 x 512) Device 3: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300 Type: Hard Disk Supports 48-bit addressing Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Signed-off-by: Peng Ma peng.ma@nxp.com Reviewed-by: Simon Glass sjg@chromium.org
Applied to u-boot/master, thanks!