On 16:46-20230929, Roger Quadros wrote:
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes. Mark them as 'bootph-all' so they are available in all pre-relocation phases.
Fixes below dts warnings:
<stdout>: Warning (reg_format): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) <stdout>: Warning (unit_address_vs_reg): /bus@f4000/ethernet@8000000/mdio@f00: node has a unit name, but no reg or ranges property <stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format' <stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' <stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format' <stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' <stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format' <stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #address-cells value <stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #size-cells value <stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' <stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' <stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0100:msi-parent: Could not get phandle node for (cell 0) <stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0000:msi-parent: Could not get phandle node for (cell 0) <stdout>: Warning (phys_property): /bus@f4000/ethernet@8000000/ethernet-ports/port@2:phys: Could not get phandle node for (cell 0)
Signed-off-by: Roger Quadros rogerq@kernel.org
arch/arm/dts/k3-am642-sk-u-boot.dtsi | 36 ++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/arch/arm/dts/k3-am642-sk-u-boot.dtsi index 5599977f6c..40a53df0b0 100644 --- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi @@ -92,6 +92,38 @@ bootph-all; };
+&inta_main_dmss {
- bootph-all;
+};
+&main_pktdma {
- bootph-all;
+};
+&mdio1_pins_default {
- bootph-all;
+};
+&cpsw3g_mdio {
- bootph-all;
+};
+&cpsw3g_phy0 {
- bootph-all;
+};
+&cpsw3g_phy1 {
- bootph-all;
+};
+&rgmii1_pins_default {
- bootph-all;
+};
+&rgmii2_pins_default {
- bootph-all;
+};
&cpsw3g { bootph-all;
@@ -100,6 +132,10 @@ }; };
+&phy_gmii_sel {
- bootph-all;
+};
&cpsw_port2 { bootph-all; }; -- 2.34.1
Reviewed-by: Nishanth Menon nm@ti.com