On 09/08/15 09:50, Dmitry Lifshitz wrote:
Fix MMC1 pinmux setup, thus enable SD/MMC card support with CM-T3517.
Signed-off-by: Dmitry Lifshitz lifshitz@compulab.co.il
Acked-by: Igor Grinberg grinberg@compulab.co.il
board/compulab/cm_t3517/mux.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c index 88ce2cc..f31f19e 100644 --- a/board/compulab/cm_t3517/mux.c +++ b/board/compulab/cm_t3517/mux.c @@ -121,12 +121,12 @@ void set_muxconf_regs(void) MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/
/* MMC1 */
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0));
MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0));
MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0));
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0));
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0));
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0));
/* DSS */ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0));