On 06/05/2022 07:37, Neha Malcom Francis wrote:
As tispl.bin is to be packaged (with ATF, OPTEE, DM and A72 SPL) using binman, the shell script k3_fit_atf.sh is no longer needed. Removing
This is not true until you have migrated all K3 platforms to use binman. So let's leave this script here for now.
this file.
Signed-off-by: Neha Malcom Francis n-francis@ti.com
cheers, -roger
tools/k3_fit_atf.sh | 123 -------------------------------------------- 1 file changed, 123 deletions(-) delete mode 100755 tools/k3_fit_atf.sh
diff --git a/tools/k3_fit_atf.sh b/tools/k3_fit_atf.sh deleted file mode 100755 index 7bc07ad074..0000000000 --- a/tools/k3_fit_atf.sh +++ /dev/null @@ -1,123 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ -# -# script to generate FIT image source for K3 Family boards with -# ATF, OPTEE, SPL and multiple device trees (given on the command line). -# Inspired from board/sunxi/mksunxi_fit_atf.sh -# -# usage: $0 <atf_load_addr> <dt_name> [<dt_name> [<dt_name] ...]
-[ -z "$ATF" ] && ATF="bl31.bin"
-if [ ! -f $ATF ]; then
- echo "WARNING ATF file $ATF NOT found, resulting binary is non-functional" >&2
- ATF=/dev/null
-fi
-[ -z "$TEE" ] && TEE="bl32.bin"
-if [ ! -f $TEE ]; then
- echo "WARNING OPTEE file $TEE NOT found, resulting might be non-functional" >&2
- TEE=/dev/null
-fi
-[ -z "$DM" ] && DM="dm.bin"
-if [ ! -e $DM ]; then
- echo "WARNING DM file $DM NOT found, resulting might be non-functional" >&2
- DM=/dev/null
-fi
-if [ ! -z "$IS_HS" ]; then
- HS_APPEND=_HS
-fi
-cat << __HEADER_EOF -/dts-v1/;
-/ {
- description = "Configuration to load ATF and SPL";
- #address-cells = <1>;
- images {
atf {description = "ARM Trusted Firmware";data = /incbin/("$ATF");type = "firmware";arch = "arm64";compression = "none";os = "arm-trusted-firmware";load = <$1>;entry = <$1>;};tee {description = "OPTEE";data = /incbin/("$TEE");type = "tee";arch = "arm64";compression = "none";os = "tee";load = <0x9e800000>;entry = <0x9e800000>;};dm {description = "DM binary";data = /incbin/("$DM");type = "firmware";arch = "arm32";compression = "none";os = "DM";load = <0x89000000>;entry = <0x89000000>;};spl {description = "SPL (64-bit)";data = /incbin/("spl/u-boot-spl-nodtb.bin$HS_APPEND");type = "standalone";os = "U-Boot";arch = "arm64";compression = "none";load = <0x80080000>;entry = <0x80080000>;};-__HEADER_EOF
-# shift through ATF load address in the command line arguments -shift
-for dtname in $* -do
- cat << __FDT_IMAGE_EOF
$(basename $dtname) {description = "$(basename $dtname .dtb)";data = /incbin/("$dtname$HS_APPEND");type = "flat_dt";arch = "arm";compression = "none";};-__FDT_IMAGE_EOF -done
-cat << __CONF_HEADER_EOF
- };
- configurations {
default = "$(basename $1)";-__CONF_HEADER_EOF
-for dtname in $* -do
- cat << __CONF_SECTION_EOF
$(basename $dtname) {description = "$(basename $dtname .dtb)";firmware = "atf";loadables = "tee", "dm", "spl";fdt = "$(basename $dtname)";};-__CONF_SECTION_EOF -done
-cat << __ITS_EOF
- };
-}; -__ITS_EOF