From: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com
At the moment the xilinx zynqmp soc is only supported by xilinx vendor boards. Rework the xilinx zynqmp board code to support reuse by foreign vendor boards.
Stefan Herbrechtsmeier (10): firmware: firmware-zynqmp: Check if rx channel dev pointer is valid firmware: firmware-zynqmp: Probe driver before use soc: xilinx: zynqmp: Add machine identification support xilinx: zynqmp: Use soc machine function to get silicon idcode name xilinx: cpuinfo: Print soc machine xilinx: common: Separate display cpu info function xilinx: zynqmp: make spi flash support optional tools: zynqmp_psu_init_minimize: Remove low level uart settings tools: zynqmp_psu_init_minimize: Add serdes_illcalib forward declaration xilinx: zynqmp: Support vendor specific board_init
board/xilinx/common/Makefile | 3 + board/xilinx/common/board.c | 30 +-- board/xilinx/common/board.h | 2 + board/xilinx/common/cpu-info.c | 35 ++++ board/xilinx/zynqmp/zynqmp.c | 291 ++--------------------------- drivers/firmware/firmware-zynqmp.c | 20 +- drivers/soc/soc_xilinx_zynqmp.c | 289 +++++++++++++++++++++++++++- tools/zynqmp_psu_init_minimize.sh | 22 +++ 8 files changed, 390 insertions(+), 302 deletions(-) create mode 100644 board/xilinx/common/cpu-info.c