On Fri, Jan 11, 2019 at 11:34:07PM +0530, Jagan Teki wrote:
I thought of waiting this till CLK framework gets Mainline, but migration deadline for DM_MMC and BLK seems expiring in next release. So instead of doing so huddle and make some last minute changes, I have managed to add CLK, Reset code for mmc driver via driver data.
U-Boot 2019.01-rc3-00084-g0ce29380cf (Jan 14 2019 - 11:22:13 +0200) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Model: Olimex A20-OLinuXino-LIME2-eMMC I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from FAT... Card did not respond to voltage select!
eMMC seems to be broken: => mmc list mmc@1c0f000: 0 mmc@1c11000: 1 => mmc dev 1 => mmc dev 0 MMC: no card present => mmc part MMC: no card present => mmc info MMC: no card present
Setting up a 640x480 dvi console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: sunxi_set_gate: (CLK#66) unhandled eth0: ethernet@1c50000
And also CLK#66 message
Add for all Allwinner SoC's and enable at arch/arm/Kconfig.
I shall merge this in comming MW, so early test feel better to go for the release. Request to test respective board takers.
Any inputs, Jagan.
Jagan Teki (7): mmc: sunxi: Configure reset support for DM_MMC mmc: sunxi: Add A83T emmc compatible mmc: sunxi: Add mmc, emmc H5/A64 compatible mmc: sunxi: Add DM_MMC support for H6 mmc: sunxi: Add DM_MMC support for A80 arm: sunxi: Enable DM_MMC arm: dts: sunxi: Enumerate MMC2 as MMC1
arch/arm/Kconfig | 1 + arch/arm/dts/sunxi-u-boot.dtsi | 4 + .../include/asm/arch-sunxi/clock_sun50i_h6.h | 3 + arch/arm/mach-sunxi/Kconfig | 1 - configs/Linksprite_pcDuino3_defconfig | 1 - drivers/mmc/sunxi_mmc.c | 73 ++++++++++++++++++- 6 files changed, 79 insertions(+), 4 deletions(-)
-- 2.18.0.321.gffc6fa0e3