This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it.
Cc: Erik van Luijk evanluijk@interact.nl Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-at91/Kconfig | 6 - board/mini-box/picosam9g45/Kconfig | 12 - board/mini-box/picosam9g45/MAINTAINERS | 6 - board/mini-box/picosam9g45/Makefile | 17 -- board/mini-box/picosam9g45/led.c | 22 -- board/mini-box/picosam9g45/picosam9g45.c | 346 ----------------------- configs/picosam9g45_defconfig | 48 ---- include/configs/picosam9g45.h | 118 -------- 8 files changed, 575 deletions(-) delete mode 100644 board/mini-box/picosam9g45/Kconfig delete mode 100644 board/mini-box/picosam9g45/MAINTAINERS delete mode 100644 board/mini-box/picosam9g45/Makefile delete mode 100644 board/mini-box/picosam9g45/led.c delete mode 100644 board/mini-box/picosam9g45/picosam9g45.c delete mode 100644 configs/picosam9g45_defconfig delete mode 100644 include/configs/picosam9g45.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 22f6e4114e8e..1adf09b9a148 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -134,11 +134,6 @@ config TARGET_PM9G45 bool "Ronetix pm9g45 board" select AT91SAM9G45
-config TARGET_PICOSAM9G45 - bool "Mini-box picosam9g45 board" - select AT91SAM9M10G45 - select SUPPORT_SPL - config TARGET_AT91SAM9N12EK bool "Atmel AT91SAM9N12-EK board" select AT91SAM9N12 @@ -338,7 +333,6 @@ source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" source "board/gardena/smart-gateway-at91sam/Kconfig" source "board/l+g/vinco/Kconfig" -source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" source "board/ronetix/pm9g45/Kconfig" diff --git a/board/mini-box/picosam9g45/Kconfig b/board/mini-box/picosam9g45/Kconfig deleted file mode 100644 index 98ec0c457a62..000000000000 --- a/board/mini-box/picosam9g45/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_PICOSAM9G45 - -config SYS_BOARD - default "picosam9g45" - -config SYS_VENDOR - default "mini-box" - -config SYS_CONFIG_NAME - default "picosam9g45" - -endif diff --git a/board/mini-box/picosam9g45/MAINTAINERS b/board/mini-box/picosam9g45/MAINTAINERS deleted file mode 100644 index a8cf01d70380..000000000000 --- a/board/mini-box/picosam9g45/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PICOSAM9G45 BOARD -M: Erik van Luijk evanluijk@interact.nl -S: Maintained -F: board/mini-box/picosam9g45/ -F: include/configs/picosam9g45.h -F: configs/picosam9g45_defconfig diff --git a/board/mini-box/picosam9g45/Makefile b/board/mini-box/picosam9g45/Makefile deleted file mode 100644 index 6e98997a7c31..000000000000 --- a/board/mini-box/picosam9g45/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile for mini-box PICOSAM9G45 (AT91SAM9G45) based board -# (C) Copytight 2015 Inter Act B.V. -# -# Based on: -# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop stelian@popies.net -# Lead Tech Design <www.leadtechdesign.com> - -obj-y += picosam9g45.o -obj-y += led.o diff --git a/board/mini-box/picosam9g45/led.c b/board/mini-box/picosam9g45/led.c deleted file mode 100644 index 8ce8b6bbeac2..000000000000 --- a/board/mini-box/picosam9g45/led.c +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - */ - -#include <common.h> -#include <status_led.h> -#include <asm/io.h> -#include <asm/arch/at91sam9g45.h> -#include <asm/arch/clk.h> -#include <asm/arch/gpio.h> - -void coloured_LED_init(void) -{ - at91_periph_clk_enable(ATMEL_ID_PIODE); - - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - - at91_set_gpio_value(CONFIG_GREEN_LED, 1); -} diff --git a/board/mini-box/picosam9g45/picosam9g45.c b/board/mini-box/picosam9g45/picosam9g45.c deleted file mode 100644 index e8e1ac3eb195..000000000000 --- a/board/mini-box/picosam9g45/picosam9g45.c +++ /dev/null @@ -1,346 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Board functions for mini-box PICOSAM9G45 (AT91SAM9G45) based board - * (C) Copyright 2015 Inter Act B.V. - * - * Based on: - * U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - */ - -#include <common.h> -#include <init.h> -#include <vsprintf.h> -#include <asm/io.h> -#include <asm/arch/clk.h> -#include <asm/arch/at91sam9g45_matrix.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/gpio.h> -#include <asm/arch/clk.h> -#include <lcd.h> -#include <linux/mtd/rawnand.h> -#include <atmel_lcdc.h> -#include <atmel_mci.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif -#include <netdev.h> -#include <asm/mach-types.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -#if defined(CONFIG_SPL_BUILD) -#include <spl.h> - -void at91_spl_board_init(void) -{ -#ifdef CONFIG_SYS_USE_MMC - at91_mci_hw_init(); -#endif -} - -#include <asm/arch/atmel_mpddrc.h> -static void ddr2_conf(struct atmel_mpddrc_config *ddr2) -{ - ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); - - ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | - ATMEL_MPDDRC_CR_NR_ROW_14 | - ATMEL_MPDDRC_CR_DQMS_SHARED | - ATMEL_MPDDRC_CR_CAS_DDR_CAS3); - - ddr2->rtr = 0x24b; - - ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |/* 6*7.5 = 45 ns */ - 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |/* 2*7.5 = 15 ns */ - 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | /* 2*7.5 = 15 ns */ - 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | /* 8*7.5 = 60 ns */ - 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | /* 2*7.5 = 15 ns */ - 1 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | /* 1*7.5= 7.5 ns*/ - 1 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | /* 1 clk cycle */ - 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); /* 2 clk cycles */ - - ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | /* 2*7.5 = 15 ns */ - 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | - 16 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | - 14 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); - - ddr2->tpr2 = (1 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | - 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | - 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | - 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); -} - -void mem_init(void) -{ - struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct atmel_mpddrc_config ddr2; - unsigned long csa; - - ddr2_conf(&ddr2); - - at91_system_clk_enable(AT91_PMC_DDR); - - /* Chip select 1 is for DDR2/SDRAM */ - csa = readl(&mat->ebicsa); - csa |= AT91_MATRIX_EBI_CS1A_SDRAMC; - csa &= ~AT91_MATRIX_EBI_VDDIOMSEL_3_3V; - writel(csa, &mat->ebicsa); - - /* DDRAM2 Controller initialize */ - ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2); - ddr2_init(ATMEL_BASE_DDRSDRC1, ATMEL_BASE_CS1, &ddr2); -} -#endif - -#ifdef CONFIG_CMD_USB -static void picosam9g45_usb_hw_init(void) -{ - at91_periph_clk_enable(ATMEL_ID_PIODE); - - at91_set_gpio_output(AT91_PIN_PD1, 0); - at91_set_gpio_output(AT91_PIN_PD3, 0); -} -#endif - -#ifdef CONFIG_MACB -static void picosam9g45_macb_hw_init(void) -{ - struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - - at91_periph_clk_enable(ATMEL_ID_EMAC); - - /* - * Disable pull-up on: - * RXDV (PA15) => PHY normal mode (not Test mode) - * ERX0 (PA12) => PHY ADDR0 - * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA12) | - pin_to_mask(AT91_PIN_PA13), - &pioa->pudr); - - at91_phy_reset(); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA12) | - pin_to_mask(AT91_PIN_PA13), - &pioa->puer); - - /* And the pins. */ - at91_macb_hw_init(); -} -#endif - -#ifdef CONFIG_LCD - -vidinfo_t panel_info = { - .vl_col = 480, - .vl_row = 272, - .vl_clk = 9000000, - .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | - ATMEL_LCDC_INVFRAME_NORMAL, - .vl_bpix = 3, - .vl_tft = 1, - .vl_hsync_len = 45, - .vl_left_margin = 1, - .vl_right_margin = 1, - .vl_vsync_len = 1, - .vl_upper_margin = 40, - .vl_lower_margin = 1, - .mmio = ATMEL_BASE_LCDC, -}; - - -void lcd_enable(void) -{ - at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */ -} - -void lcd_disable(void) -{ - at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */ -} - -static void picosam9g45_lcd_hw_init(void) -{ - at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ - at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ - at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ - - at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ - at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ - at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ - at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ - at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ - at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ - at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ - - at91_periph_clk_enable(ATMEL_ID_LCDC); - - gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; -} - -#ifdef CONFIG_LCD_INFO -#include <nand.h> -#include <version.h> - -void lcd_show_board_info(void) -{ - ulong dram_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("(C) 2015 Inter Act B.V.\n"); - lcd_printf("support@interact.nl\n"); - lcd_printf("%s CPU at %s MHz\n", - ATMEL_CPU_NAME, - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - lcd_printf(" %ld MB SDRAM\n", dram_size >> 20); -} -#endif /* CONFIG_LCD_INFO */ -#endif - -#ifdef CONFIG_GENERIC_ATMEL_MCI -int board_mmc_init(struct bd_info *bis) -{ - at91_mci_hw_init(); - - return atmel_mci_init((void *)ATMEL_BASE_MCI0); -} -#endif - -int board_early_init_f(void) -{ - at91_seriald_hw_init(); - return 0; -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_PICOSAM9G45; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_CMD_USB - picosam9g45_usb_hw_init(); -#endif -#ifdef CONFIG_ATMEL_SPI - at91_spi0_hw_init(1 << 4); -#endif -#ifdef CONFIG_MACB - picosam9g45_macb_hw_init(); -#endif -#ifdef CONFIG_LCD - picosam9g45_lcd_hw_init(); -#endif - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) - + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - -int board_eth_init(struct bd_info *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); -#endif - return rc; -} - -/* SPI chip select control */ -#ifdef CONFIG_ATMEL_SPI -#include <spi.h> - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs < 2; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - switch (slave->cs) { - case 1: - at91_set_gpio_output(AT91_PIN_PB18, 0); - break; - case 0: - default: - at91_set_gpio_output(AT91_PIN_PB3, 0); - break; - } -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - switch (slave->cs) { - case 1: - at91_set_gpio_output(AT91_PIN_PB18, 1); - break; - case 0: - default: - at91_set_gpio_output(AT91_PIN_PB3, 1); - break; - } -} -#endif /* CONFIG_ATMEL_SPI */ diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig deleted file mode 100644 index 915c2ba81289..000000000000 --- a/configs/picosam9g45_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_AT91=y -CONFIG_SYS_TEXT_BASE=0x23f00000 -CONFIG_TARGET_PICOSAM9G45=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_ENV_SIZE=0x4000 -CONFIG_SPL_TEXT_BASE=0x300000 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="U-Boot> " -# CONFIG_CMD_BDI is not set -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_SPL_DM=y -CONFIG_AT91_GPIO=y -CONFIG_ATMEL_USART=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_WDT=y -CONFIG_WDT_AT91=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h deleted file mode 100644 index 77b7ce411f5b..000000000000 --- a/include/configs/picosam9g45.h +++ /dev/null @@ -1,118 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the mini-box PICOSAM9G45 board. - * (C) Copyright 2015 Inter Act B.V. - * - * Based on: - * U-Boot file: include/configs/at91sam9m10g45ek.h - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/hardware.h> - -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -/* LCD */ -#define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD -#define CONFIG_ATMEL_LCD_RGB565 -/* board specific(not enough SRAM) */ -#define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* SDRAM */ -#define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) - -/* MMC */ - -#ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#ifdef CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env + linux in mmc */ - -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" -#endif - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -/* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE 0x010000 -#define CONFIG_SPL_STACK 0x310000 - -#define CONFIG_SYS_MONITOR_LEN 0x80000 - -#ifdef CONFIG_SYS_USE_MMC - -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_ATMEL_SIZE -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 - -#endif -#endif