From: Patrice Chotard patrice.chotard@st.com
All these files comes from kernel v4.15-rc1.
Update some header with correct STMicroelectronics Copyright.
Remove the paragraph about writing to the Free Software Foundation's mailing address as requested by checkpatch.
Signed-off-by: Patrice Chotard patrice.chotard@st.com --- arch/arm/dts/Makefile | 2 + arch/arm/dts/stm32f4-pinctrl.dtsi | 344 ++++++++++++++ arch/arm/dts/stm32f429-disco.dts | 124 +++++ arch/arm/dts/stm32f429-pinctrl.dtsi | 96 ++++ arch/arm/dts/stm32f429.dtsi | 699 ++++++++++++++++++++++++++++ include/dt-bindings/mfd/stm32f4-rcc.h | 108 +++++ include/dt-bindings/pinctrl/stm32-pinfunc.h | 30 ++ 7 files changed, 1403 insertions(+) create mode 100644 arch/arm/dts/stm32f4-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32f429-disco.dts create mode 100644 arch/arm/dts/stm32f429-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32f429.dtsi create mode 100644 include/dt-bindings/mfd/stm32f4-rcc.h create mode 100644 include/dt-bindings/pinctrl/stm32-pinfunc.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ed85349..2cc010c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -213,6 +213,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
+dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb + dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \ stm32f769-disco.dtb dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \ diff --git a/arch/arm/dts/stm32f4-pinctrl.dtsi b/arch/arm/dts/stm32f4-pinctrl.dtsi new file mode 100644 index 0000000..df59956 --- /dev/null +++ b/arch/arm/dts/stm32f4-pinctrl.dtsi @@ -0,0 +1,344 @@ +/* + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved + * Author(s): Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> + +/ { + soc { + pinctrl: pin-controller { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart3_pins_a: usart3@0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */ + bias-disable; + }; + }; + + usbotg_fs_pins_a: usbotg_fs@0 { + pins { + pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ + <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ + <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_b: usbotg_fs@1 { + pins { + pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */ + <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */ + <STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_hs_pins_a: usbotg_hs@0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/ + <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ + <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */ + <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */ + <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */ + <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */ + <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */ + <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */ + <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */ + <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */ + <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */ + <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ethernet_mii: mii@0 { + pins { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */ + <STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */ + <STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */ + <STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */ + <STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */ + <STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */ + slew-rate = <2>; + }; + }; + + adc3_in8_pin: adc@200 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; + }; + }; + + pwm1_pins: pwm@1 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */ + <STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */ + }; + }; + + pwm3_pins: pwm@3 { + pins { + pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */ + <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */ + }; + }; + + i2c1_pins: i2c1@0 { + pins { + pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */ + <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; + + ltdc_pins: ltdc@0 { + pins { + pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ + slew-rate = <2>; + }; + }; + + dcmi_pins: dcmi@0 { + pins { + pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */ + <STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */ + <STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */ + <STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */ + <STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */ + <STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */ + <STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */ + <STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */ + <STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */ + <STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */ + <STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32f429-disco.dts b/arch/arm/dts/stm32f429-disco.dts new file mode 100644 index 0000000..e914b6b --- /dev/null +++ b/arch/arm/dts/stm32f429-disco.dts @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2015, STMicroelectronics - All Rights Reserved + * Author(s): Maxime Coquelin mcoquelin.stm32@gmail.com for STMicroelectronics. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" +#include "stm32f429-pinctrl.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "STMicroelectronics STM32F429i-DISCO board"; + compatible = "st,stm32f429i-disco", "st,stm32f429"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x90000000 0x800000>; + }; + + aliases { + serial0 = &usart1; + }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpiog 14 0>; + }; + green { + gpios = <&gpiog 13 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "User"; + linux,code = <KEY_HOME>; + gpios = <&gpioa 0 0>; + }; + }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + gpio = <&gpioc 4 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; +}; + +&clk_hse { + clock-frequency = <8000000>; +}; + +&crc { + status = "okay"; +}; + +&rtc { + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSI>; + status = "okay"; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + compatible = "st,stm32f4x9-fsotg"; + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32f429-pinctrl.dtsi b/arch/arm/dts/stm32f429-pinctrl.dtsi new file mode 100644 index 0000000..77246b3 --- /dev/null +++ b/arch/arm/dts/stm32f429-pinctrl.dtsi @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved + * Author(s): Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "stm32f4-pinctrl.dtsi" + +/ { + soc { + pinctrl: pin-controller { + compatible = "st,stm32f429-pinctrl"; + + gpioa: gpio@40020000 { + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@40020400 { + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@40020800 { + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@40020c00 { + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@40021000 { + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@40021400 { + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@40021800 { + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@40021c00 { + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@40022000 { + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@40022400 { + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@40022800 { + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32f429.dtsi b/arch/arm/dts/stm32f429.dtsi new file mode 100644 index 0000000..23b7946 --- /dev/null +++ b/arch/arm/dts/stm32f429.dtsi @@ -0,0 +1,699 @@ +/* + * Copyright (C) 2015, STMicroelectronics - All Rights Reserved + * Author(s): Maxime Coquelin mcoquelin.stm32@gmail.com for STMicroelectronics. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include "armv7-m.dtsi" +#include <dt-bindings/clock/stm32fx-clock.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> + +/ { + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + clk_lse: clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_i2s_ckin: i2s-ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + }; + + soc { + timer2: timer@40000000 { + compatible = "st,stm32-timer"; + reg = <0x40000000 0x400>; + interrupts = <28>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + status = "disabled"; + }; + + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + + timer3: timer@40000400 { + compatible = "st,stm32-timer"; + reg = <0x40000400 0x400>; + interrupts = <29>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + status = "disabled"; + }; + + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + timer4: timer@40000800 { + compatible = "st,stm32-timer"; + reg = <0x40000800 0x400>; + interrupts = <30>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + status = "disabled"; + }; + + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + }; + + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + + timer6: timer@40001000 { + compatible = "st,stm32-timer"; + reg = <0x40001000 0x400>; + interrupts = <54>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; + status = "disabled"; + }; + + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timer7: timer@40001400 { + compatible = "st,stm32-timer"; + reg = <0x40001400 0x400>; + interrupts = <55>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + status = "disabled"; + }; + + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + clock-names = "ck_rtc"; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; + status = "disabled"; + }; + + iwdg: watchdog@40003000 { + compatible = "st,stm32-iwdg"; + reg = <0x40003000 0x400>; + clocks = <&clk_lsi>; + status = "disabled"; + }; + + usart2: serial@40004400 { + compatible = "st,stm32-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; + status = "disabled"; + }; + + usart3: serial@40004800 { + compatible = "st,stm32-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; + status = "disabled"; + dmas = <&dma1 1 4 0x400 0x0>, + <&dma1 3 4 0x400 0x0>; + dma-names = "rx", "tx"; + }; + + usart4: serial@40004c00 { + compatible = "st,stm32-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>; + status = "disabled"; + }; + + usart5: serial@40005000 { + compatible = "st,stm32-uart"; + reg = <0x40005000 0x400>; + interrupts = <53>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>; + status = "disabled"; + }; + + i2c1: i2c@40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F4_APB1_RESET(I2C1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dac: dac@40007400 { + compatible = "st,stm32f4-dac-core"; + reg = <0x40007400 0x400>; + resets = <&rcc STM32F4_APB1_RESET(DAC)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>; + clock-names = "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dac1: dac@1 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <1>; + status = "disabled"; + }; + + dac2: dac@2 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <2>; + status = "disabled"; + }; + }; + + usart7: serial@40007800 { + compatible = "st,stm32-uart"; + reg = <0x40007800 0x400>; + interrupts = <82>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; + status = "disabled"; + }; + + usart8: serial@40007c00 { + compatible = "st,stm32-uart"; + reg = <0x40007c00 0x400>; + interrupts = <83>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; + status = "disabled"; + }; + + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + + usart1: serial@40011000 { + compatible = "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; + status = "disabled"; + dmas = <&dma2 2 4 0x400 0x0>, + <&dma2 7 4 0x400 0x0>; + dma-names = "rx", "tx"; + }; + + usart6: serial@40011400 { + compatible = "st,stm32-uart"; + reg = <0x40011400 0x400>; + interrupts = <71>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; + status = "disabled"; + }; + + adc: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + clock-names = "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + interrupt-parent = <&adc>; + interrupts = <0>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; + interrupt-parent = <&adc>; + interrupts = <1>; + dmas = <&dma2 3 1 0x400 0x0>; + dma-names = "rx"; + status = "disabled"; + }; + + adc3: adc@200 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x200>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; + interrupt-parent = <&adc>; + interrupts = <2>; + dmas = <&dma2 1 2 0x400 0x0>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + syscfg: system-config@40013800 { + compatible = "syscon"; + reg = <0x40013800 0x400>; + }; + + exti: interrupt-controller@40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; + }; + + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + pwrcfg: power-config@40007000 { + compatible = "syscon"; + reg = <0x40007000 0x400>; + }; + + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + status = "disabled"; + }; + + crc: crc@40023000 { + compatible = "st,stm32f4-crc"; + reg = <0x40023000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>; + status = "disabled"; + }; + + rcc: rcc@40023810 { + #reset-cells = <1>; + #clock-cells = <2>; + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + assigned-clocks = <&rcc 1 CLK_HSE_RTC>; + assigned-clock-rates = <1000000>; + }; + + dma1: dma-controller@40026000 { + compatible = "st,stm32-dma"; + reg = <0x40026000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>; + #dma-cells = <4>; + }; + + dma2: dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>; + #dma-cells = <4>; + st,mem2mem; + }; + + mac: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + status = "disabled"; + }; + + usbotg_hs: usb@40040000 { + compatible = "snps,dwc2"; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>; + clock-names = "otg"; + status = "disabled"; + }; + + usbotg_fs: usb@50000000 { + compatible = "st,stm32f4x9-fsotg"; + reg = <0x50000000 0x40000>; + interrupts = <67>; + clocks = <&rcc 0 39>; + clock-names = "otg"; + status = "disabled"; + }; + + dcmi: dcmi@50050000 { + compatible = "st,stm32-dcmi"; + reg = <0x50050000 0x400>; + interrupts = <78>; + resets = <&rcc STM32F4_AHB2_RESET(DCMI)>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>; + clock-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&dcmi_pins>; + dmas = <&dma2 1 1 0x414 0x3>; + dma-names = "tx"; + status = "disabled"; + }; + + rng: rng@50060800 { + compatible = "st,stm32-rng"; + reg = <0x50060800 0x400>; + interrupts = <80>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; + + }; + }; +}; + +&systick { + clocks = <&rcc 1 SYSTICK>; + status = "okay"; +}; diff --git a/include/dt-bindings/mfd/stm32f4-rcc.h b/include/dt-bindings/mfd/stm32f4-rcc.h new file mode 100644 index 0000000..36448a5 --- /dev/null +++ b/include/dt-bindings/mfd/stm32f4-rcc.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the STM32F4 RCC IP + */ + +#ifndef _DT_BINDINGS_MFD_STM32F4_RCC_H +#define _DT_BINDINGS_MFD_STM32F4_RCC_H + +/* AHB1 */ +#define STM32F4_RCC_AHB1_GPIOA 0 +#define STM32F4_RCC_AHB1_GPIOB 1 +#define STM32F4_RCC_AHB1_GPIOC 2 +#define STM32F4_RCC_AHB1_GPIOD 3 +#define STM32F4_RCC_AHB1_GPIOE 4 +#define STM32F4_RCC_AHB1_GPIOF 5 +#define STM32F4_RCC_AHB1_GPIOG 6 +#define STM32F4_RCC_AHB1_GPIOH 7 +#define STM32F4_RCC_AHB1_GPIOI 8 +#define STM32F4_RCC_AHB1_GPIOJ 9 +#define STM32F4_RCC_AHB1_GPIOK 10 +#define STM32F4_RCC_AHB1_CRC 12 +#define STM32F4_RCC_AHB1_BKPSRAM 18 +#define STM32F4_RCC_AHB1_CCMDATARAM 20 +#define STM32F4_RCC_AHB1_DMA1 21 +#define STM32F4_RCC_AHB1_DMA2 22 +#define STM32F4_RCC_AHB1_DMA2D 23 +#define STM32F4_RCC_AHB1_ETHMAC 25 +#define STM32F4_RCC_AHB1_ETHMACTX 26 +#define STM32F4_RCC_AHB1_ETHMACRX 27 +#define STM32F4_RCC_AHB1_ETHMACPTP 28 +#define STM32F4_RCC_AHB1_OTGHS 29 +#define STM32F4_RCC_AHB1_OTGHSULPI 30 + +#define STM32F4_AHB1_RESET(bit) (STM32F4_RCC_AHB1_##bit + (0x10 * 8)) +#define STM32F4_AHB1_CLOCK(bit) (STM32F4_RCC_AHB1_##bit) + +/* AHB2 */ +#define STM32F4_RCC_AHB2_DCMI 0 +#define STM32F4_RCC_AHB2_CRYP 4 +#define STM32F4_RCC_AHB2_HASH 5 +#define STM32F4_RCC_AHB2_RNG 6 +#define STM32F4_RCC_AHB2_OTGFS 7 + +#define STM32F4_AHB2_RESET(bit) (STM32F4_RCC_AHB2_##bit + (0x14 * 8)) +#define STM32F4_AHB2_CLOCK(bit) (STM32F4_RCC_AHB2_##bit + 0x20) + +/* AHB3 */ +#define STM32F4_RCC_AHB3_FMC 0 +#define STM32F4_RCC_AHB3_QSPI 1 + +#define STM32F4_AHB3_RESET(bit) (STM32F4_RCC_AHB3_##bit + (0x18 * 8)) +#define STM32F4_AHB3_CLOCK(bit) (STM32F4_RCC_AHB3_##bit + 0x40) + +/* APB1 */ +#define STM32F4_RCC_APB1_TIM2 0 +#define STM32F4_RCC_APB1_TIM3 1 +#define STM32F4_RCC_APB1_TIM4 2 +#define STM32F4_RCC_APB1_TIM5 3 +#define STM32F4_RCC_APB1_TIM6 4 +#define STM32F4_RCC_APB1_TIM7 5 +#define STM32F4_RCC_APB1_TIM12 6 +#define STM32F4_RCC_APB1_TIM13 7 +#define STM32F4_RCC_APB1_TIM14 8 +#define STM32F4_RCC_APB1_WWDG 11 +#define STM32F4_RCC_APB1_SPI2 14 +#define STM32F4_RCC_APB1_SPI3 15 +#define STM32F4_RCC_APB1_UART2 17 +#define STM32F4_RCC_APB1_UART3 18 +#define STM32F4_RCC_APB1_UART4 19 +#define STM32F4_RCC_APB1_UART5 20 +#define STM32F4_RCC_APB1_I2C1 21 +#define STM32F4_RCC_APB1_I2C2 22 +#define STM32F4_RCC_APB1_I2C3 23 +#define STM32F4_RCC_APB1_CAN1 25 +#define STM32F4_RCC_APB1_CAN2 26 +#define STM32F4_RCC_APB1_PWR 28 +#define STM32F4_RCC_APB1_DAC 29 +#define STM32F4_RCC_APB1_UART7 30 +#define STM32F4_RCC_APB1_UART8 31 + +#define STM32F4_APB1_RESET(bit) (STM32F4_RCC_APB1_##bit + (0x20 * 8)) +#define STM32F4_APB1_CLOCK(bit) (STM32F4_RCC_APB1_##bit + 0x80) + +/* APB2 */ +#define STM32F4_RCC_APB2_TIM1 0 +#define STM32F4_RCC_APB2_TIM8 1 +#define STM32F4_RCC_APB2_USART1 4 +#define STM32F4_RCC_APB2_USART6 5 +#define STM32F4_RCC_APB2_ADC1 8 +#define STM32F4_RCC_APB2_ADC2 9 +#define STM32F4_RCC_APB2_ADC3 10 +#define STM32F4_RCC_APB2_SDIO 11 +#define STM32F4_RCC_APB2_SPI1 12 +#define STM32F4_RCC_APB2_SPI4 13 +#define STM32F4_RCC_APB2_SYSCFG 14 +#define STM32F4_RCC_APB2_TIM9 16 +#define STM32F4_RCC_APB2_TIM10 17 +#define STM32F4_RCC_APB2_TIM11 18 +#define STM32F4_RCC_APB2_SPI5 20 +#define STM32F4_RCC_APB2_SPI6 21 +#define STM32F4_RCC_APB2_SAI1 22 +#define STM32F4_RCC_APB2_LTDC 26 +#define STM32F4_RCC_APB2_DSI 27 + +#define STM32F4_APB2_RESET(bit) (STM32F4_RCC_APB2_##bit + (0x24 * 8)) +#define STM32F4_APB2_CLOCK(bit) (STM32F4_RCC_APB2_##bit + 0xA0) + +#endif /* _DT_BINDINGS_MFD_STM32F4_RCC_H */ diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h new file mode 100644 index 0000000..b8dfe31 --- /dev/null +++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h @@ -0,0 +1,30 @@ +#ifndef _DT_BINDINGS_STM32_PINFUNC_H +#define _DT_BINDINGS_STM32_PINFUNC_H + +/* define PIN modes */ +#define GPIO 0x0 +#define AF0 0x1 +#define AF1 0x2 +#define AF2 0x3 +#define AF3 0x4 +#define AF4 0x5 +#define AF5 0x6 +#define AF6 0x7 +#define AF7 0x8 +#define AF8 0x9 +#define AF9 0xa +#define AF10 0xb +#define AF11 0xc +#define AF12 0xd +#define AF13 0xe +#define AF14 0xf +#define AF15 0x10 +#define ANALOG 0x11 + +/* define Pins number*/ +#define PIN_NO(port, line) (((port) - 'A') * 0x10 + (line)) + +#define STM32_PINMUX(port, line, mode) (((PIN_NO(port, line)) << 8) | (mode)) + +#endif /* _DT_BINDINGS_STM32_PINFUNC_H */ +