This is a small tool for calculation of SoC UID based on the same Linux function. It can be further used for generation of device unique data like mac address or exposing it as serial number.
Tested-by: Andreas Westman Dorcsak hedmoo@yahoo.com # ASUS Grouper E1565 Tested-by: Svyatoslav Ryhel clamor95@gmail.com # LG P895 T30 Signed-off-by: Svyatoslav Ryhel clamor95@gmail.com --- arch/arm/include/asm/arch-tegra/fuse.h | 7 ++ arch/arm/mach-tegra/Makefile | 4 + arch/arm/mach-tegra/fuse.c | 151 +++++++++++++++++++++++++ 3 files changed, 162 insertions(+) create mode 100644 arch/arm/mach-tegra/fuse.c
diff --git a/arch/arm/include/asm/arch-tegra/fuse.h b/arch/arm/include/asm/arch-tegra/fuse.h index 5b8e0bd8d1..f3f2ad8e3f 100644 --- a/arch/arm/include/asm/arch-tegra/fuse.h +++ b/arch/arm/include/asm/arch-tegra/fuse.h @@ -19,4 +19,11 @@ struct fuse_regs { u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */ };
+/** + * Calculate SoC UID + * + * Return: uid if ok, 0 on error + */ +unsigned long long tegra_chip_uid(void); + #endif /* ifndef _FUSE_H_ */ diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9147050b32..a5733b0bf6 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -32,6 +32,10 @@ endif obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o obj-y += pmc.o
+ifndef CONFIG_TEGRA186 +obj-y += fuse.o +endif + obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_TEGRA30) += tegra30/ obj-$(CONFIG_TEGRA114) += tegra114/ diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c new file mode 100644 index 0000000000..83bd505538 --- /dev/null +++ b/arch/arm/mach-tegra/fuse.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2012-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * (C) Copyright 2022 + * Svyatoslav Ryhel clamor95@gmail.com + */ + +#include <common.h> +#include <linux/delay.h> +#include <asm/io.h> + +#include <asm/arch/tegra.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/fuse.h> + +#include "cpu.h" + +#define FUSE_UID_LOW 0x108 +#define FUSE_UID_HIGH 0x10c + +#define FUSE_VENDOR_CODE 0x200 +#define FUSE_FAB_CODE 0x204 +#define FUSE_LOT_CODE_0 0x208 +#define FUSE_LOT_CODE_1 0x20c +#define FUSE_WAFER_ID 0x210 +#define FUSE_X_COORDINATE 0x214 +#define FUSE_Y_COORDINATE 0x218 + +#define FUSE_VENDOR_CODE_MASK 0xf +#define FUSE_FAB_CODE_MASK 0x3f +#define FUSE_WAFER_ID_MASK 0x3f +#define FUSE_X_COORDINATE_MASK 0x1ff +#define FUSE_Y_COORDINATE_MASK 0x1ff + +static u32 tegra_fuse_readl(unsigned long offset) +{ + return readl(NV_PA_FUSE_BASE + offset); +} + +static void tegra_fuse_init(void) +{ + u32 reg; + + /* + * Performed by downstream and is not + * documented by TRM. Whithout setting + * this bit fuse region will not work. + */ + reg = readl_relaxed(NV_PA_CLK_RST_BASE + 0x48); + reg |= BIT(28); + writel(reg, NV_PA_CLK_RST_BASE + 0x48); + + clock_enable(PERIPH_ID_FUSE); + udelay(2); + reset_set_enable(PERIPH_ID_FUSE, 0); +} + +unsigned long long tegra_chip_uid(void) +{ + u64 uid = 0ull; + u32 reg; + u32 cid; + u32 vendor; + u32 fab; + u32 lot; + u32 wafer; + u32 x; + u32 y; + u32 i; + + tegra_fuse_init(); + + /* This used to be so much easier in prior chips. Unfortunately, there + is no one-stop shopping for the unique id anymore. It must be + constructed from various bits of information burned into the fuses + during the manufacturing process. The 64-bit unique id is formed + by concatenating several bit fields. The notation used for the + various fields is fieldname:size_in_bits with the UID composed + thusly: + CID:4VENDOR:4FAB:6LOT:26WAFER:6<X:9><Y:9> + Where: + Field Bits Position Data + ------- ---- -------- ---------------------------------------- + CID 4 60 Chip id + VENDOR 4 56 Vendor code + FAB 6 50 FAB code + LOT 26 24 Lot code (5-digit base-36-coded-decimal, + re-encoded to 26 bits binary) + WAFER 6 18 Wafer id + X 9 9 Wafer X-coordinate + Y 9 0 Wafer Y-coordinate + ------- ---- + Total 64 + */ + + switch (tegra_get_chip()) { + case CHIPID_TEGRA20: + /* T20 has simple calculation */ + return ((unsigned long long)tegra_fuse_readl(FUSE_UID_HIGH) << 32ull) | + (unsigned long long)tegra_fuse_readl(FUSE_UID_LOW); + case CHIPID_TEGRA30: + /* T30 chip id is 0 */ + cid = 0; + break; + case CHIPID_TEGRA114: + /* T11x chip id is 1 */ + cid = 1; + break; + case CHIPID_TEGRA124: + /* T12x chip id is 3 */ + cid = 3; + break; + case CHIPID_TEGRA210: + /* T210 chip id is 5 */ + cid = 5; + default: + return 0; + } + + vendor = tegra_fuse_readl(FUSE_VENDOR_CODE) & FUSE_VENDOR_CODE_MASK; + fab = tegra_fuse_readl(FUSE_FAB_CODE) & FUSE_FAB_CODE_MASK; + + /* Lot code must be re-encoded from a 5 digit base-36 'BCD' number + to a binary number. */ + lot = 0; + reg = tegra_fuse_readl(FUSE_LOT_CODE_0) << 2; + + for (i = 0; i < 5; ++i) { + u32 digit = (reg & 0xFC000000) >> 26; + lot *= 36; + lot += digit; + reg <<= 6; + } + + wafer = tegra_fuse_readl(FUSE_WAFER_ID) & FUSE_WAFER_ID_MASK; + x = tegra_fuse_readl(FUSE_X_COORDINATE) & FUSE_X_COORDINATE_MASK; + y = tegra_fuse_readl(FUSE_Y_COORDINATE) & FUSE_Y_COORDINATE_MASK; + + uid = ((unsigned long long)cid << 60ull) + | ((unsigned long long)vendor << 56ull) + | ((unsigned long long)fab << 50ull) + | ((unsigned long long)lot << 24ull) + | ((unsigned long long)wafer << 18ull) + | ((unsigned long long)x << 9ull) + | ((unsigned long long)y << 0ull); + + return uid; +}