On Thu, 22 Jun 2017 19:55:21 +0200 daggs daggs@gmx.com wrote:
Greetings,
I'm using buildroot to generate images for the odroid c2 boards and from what I see, it uses u-boot.bin to burn into the image. I'm not seeing any other uboot product that is used for booting (unless I'm mistaken). I'm reading the odroid c2 readme file and I see it instructs the use to burn a alternative u-boot.bin from the one that was created by the env. I wonder how it is possible to actually use newer uboot when in the end uboot recommends to replace u-boot.bin with pre existing one?
From the spec I do see that C2 has SD card and eMMC.
I can only share my experience with Odroid XU3/U3.
The boot process would (probably) require some signed blobs from hardkernel (those binaries are corresponding to u-boot-spl.bin).
I can recommend looking to Hardkernel forum (they should have some topics dedicated for this SoM), or look for tizen.org wiki:
https://wiki.tizen.org/Quick_guide_for_odroidxu3
I hope, that the boot flow is similar for XU3 and C2.
Thanks,
Dagg. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de